Everything else
Perfusable Dual-Compartment Organ-on-Chip
- Bounding box
- 50.0 × 30.0 × 5.5 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a dimensionally accurate, parametric CAD model of a microfluidic device based on my description. Model the device substrate, inlet and outlet ports, internal channels, and chambers as actual geometry, not just a rendered image. First generate a top-down engineering layout showing all dimensions, then generate a 3D model with the channels cut into the substrate. Make the channel widths, depths, chamber dimensions, and port locations adjustable. Export SVG/DXF for the 2D layout and STEP/STL for the 3D design wherever supported. Clearly identify any dimensions you have assumed, and verify that all intended channels connect correctly. For the cell line information i give just label each chamber with what cell line it holds. The device should have a top and bottom compartment that is seperated by a perfusable membrane. In the bottom there should be one chamber which holds a reporter cell line and has ports for a fluorescent light source and a sensor. this chamber should be conencted to the other chamber which holds parathyroid organoids. with the order being inlet parathyroid organoids chamber, reporter cell line chamber, outlet, and ahve both chambers be round. then the top area should ahve an inlet then have a chamber above the parathyroid organoids just seperated by the semi permiable membrane and then it flow to outlet. ask any questions needed before starting
Parameters
| Name | Value | Range |
|---|---|---|
| Chip Length | 50 mm | 20 – 120 |
| Chip Width | 30 mm | 15 – 100 |
| Chamber Centreline Y | 15 mm | 4 – 50 |
| Substrate Corner Radius | 2 mm | 0 – 6 |
| Bottom Slab Thickness | 3 mm | 1.5 – 8 |
| Organoid Chamber Dia | 8 mm | 2 – 20 |
| Organoid Chamber Depth | 2 mm | 0.3 – 5 |
| Organoid Chamber X | 15 mm | 5 – 60 |
| Reporter Chamber Dia | 6 mm | 2 – 20 |
| Reporter Chamber Depth | 2 mm | 0.3 – 5 |
| Reporter Chamber X | 36 mm | 10 – 100 |
| Connecting Channel Width | 0.5 mm | 0.1 – 3 |
| Connecting Channel Depth | 0.3 mm | 0.1 – 2 |
| Bottom Inlet Port Dia | 1.5 mm | 0.3 – 4 |
| Bottom Outlet Port Dia | 1.5 mm | 0.3 – 4 |
| Light/Sensor Port Dia | 1 mm | 0.2 – 3 |
| Membrane Diameter | 10 mm | 3 – 30 |
| Membrane Thickness | 0.05 mm | 0.02 – 1 |
| Top Slab Thickness | 2.5 mm | 1 – 8 |
| Top Chamber Dia | 8 mm | 2 – 20 |
| Top Chamber Depth | 1.5 mm | 0.2 – 5 |
| Top Channel Width | 0.5 mm | 0.1 – 3 |
| Top Channel Depth | 0.3 mm | 0.1 – 2 |
| Top Port Dia | 1.5 mm | 0.3 – 2 |
| Top Port Bore Length | 5 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
DC 24V DALI SLIM LED Sürücü Gövdesi (360 mm)
BU REFERANSA GÖRE REVİZE ET
