Everything else
Peregrine Falcon Fighter – 1:72
- Bounding box
- 305.2 × 170.8 × 60.2 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
I WANT AN 3D MODEL OF AN FIGHTER PLANE WHICH IS ADVANCE ITS WINGS SHOULD BE BASED ON 1005 AERODYNAMICS AND SHOULD BE BASED ON CENCEPT OF Peregrine Falcon'S WINGS . THE AIRCRAFT SHOULD BE PRECISELLY BUIT AND SHOULD BE ADVANCE OR MYBE FUTURESTIC
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage Length | 250 mm | 180 – 400 |
| Fuselage Max Width | 28 mm | 18 – 50 |
| Fuselage Max Height | 22 mm | 14 – 40 |
| Nose Cone Length | 55 mm | 30 – 100 |
| Cockpit Canopy Length | 38 mm | 20 – 70 |
| Cockpit Canopy Width | 18 mm | 10 – 30 |
| Cockpit Canopy Height | 10 mm | 6 – 18 |
| Wing Span (half = one side) | 160 mm | 100 – 280 |
| Wing Root Chord | 90 mm | 50 – 150 |
| Wing Tip Chord | 18 mm | 6 – 40 |
| Wing Max Thickness | 5 mm | 2 – 12 |
| Wing LE Sweep Angle | 55 deg | 30 – 75 |
| Wing LE X from Nose | 120 mm | 60 – 200 |
| Canard Span (full) | 60 mm | 30 – 100 |
| Canard Root Chord | 28 mm | 12 – 55 |
| Canard Tip Chord | 10 mm | 4 – 20 |
| Canard Thickness | 3 mm | 1.5 – 7 |
| Canard LE X from Nose | 48 mm | 20 – 100 |
| V-Tail Height | 38 mm | 20 – 70 |
| V-Tail Root Chord | 52 mm | 25 – 90 |
| V-Tail Tip Chord | 20 mm | 6 – 40 |
| V-Tail Thickness | 4 mm | 2 – 8 |
| V-Tail Cant Angle (outward) | 25 deg | 10 – 45 |
| V-Tail Lateral Spacing | 16 mm | 8 – 30 |
| V-Tail LE X from Nose | 192 mm | 130 – 240 |
| Engine Nacelle Length | 80 mm | 40 – 140 |
| Engine Nacelle Diameter | 22 mm | 12 – 40 |
| Nacelle Start X from Nose | 155 mm | 80 – 220 |
| Intake Width | 20 mm | 10 – 36 |
| Intake Height | 10 mm | 5 – 18 |
| Intake Start X from Nose | 62 mm | 30 – 130 |
| Intake Duct Length | 90 mm | 40 – 160 |
| Falcon Tomial Notch Depth | 6 mm | 0 – 15 |
| Notch Position from Root (%) | 55 pct | 20 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm