618111.8
Loading the interactive model…
Interactive 3D model of Peltier water cold plate 61mm hollow

Everything else

Peltier water cold plate 61mm hollow

1 views
Bounding box
81 × 61 × 11.8 mm
Engine
3D Printing B-rep
Parameters
32
Published
November 20, 2026

Download

Free to download and use. See the terms.

The prompt

حجرة التبريد المائي 61×61 مم مع توفير البلاستيك: الجانبان المصمتان غير المستخدمين صارا مجوفين من الداخل بتجاويف مغلقة تفصلها أضلاع تقوية، وباقي التصميم كما هو

Parameters

NameValueRange
Heat sink length and width40 mm30 – 50
Heat sink total height11 mm8 – 15
Heat sink base plate thickness2.5 mm1.5 – 5
Number of fins on the heat sink12 mm6 – 20
Fin thickness1.2 mm0.6 – 3
Pocket clearance per side0.25 mm0 – 0.5
Sink protrusion above the plastic rim0.25 mm0 – 1
Body length and width61 mm50 – 70
Solid floor thickness outside the bottom opening3 mm2 – 6
End wall thickness2.5 mm1.6 – 4
Round recess diameter on the bottom face60 mm40 – 68
Round recess depth = thickness of the disc0.25 mm0.1 – 1
Opening diameter into the chamber59.5 mm40 – 68
Outer wall around the hollow side zones2 mm1.2 – 4
Wall between a hollow zone and the water or sink pocket1.6 mm1.2 – 4
Solid skin under the hollow zones1.2 mm0.8 – 3
Solid skin above the hollow zones1.6 mm1.2 – 4
Thickness of each support rib1.2 mm0.8 – 3
Rib spacing, centre to centre15 mm8 – 30
Guide wall thickness1 mm0.8 – 2
Separator fin number counted from each side5 mm2 – 8
Plenum corner radius2.5 mm1 – 4
Guide wall to end wall fillet2.5 mm1 – 4
Port bore diameter8 mm3 – 8
Barb outer diameter10 mm5 – 10
Barb length outside the body10 mm6 – 16
Peltier module thickness3.8 mm2 – 6
Frame lip height above the sink top0.5 mm0.2 – 5
Frame wall thickness1.6 mm1 – 4
Width of each wire slot3.5 mm2 – 8
Distance from each Peltier corner to the slot centre3 mm3 – 15
Wire side: 0 = front edge, 1 = back edge0 mm0 – 1

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Peltier water cold plate 61mm hollow - Free CAD Model (STEP, STL) | TextoCAD