567616.5
Loading the interactive model…
Interactive 3D model of Peltier water cold plate 56mm

Everything else

Peltier water cold plate 56mm

1 views
Bounding box
76 × 56 × 16.5 mm
Engine
3D Printing B-rep
Parameters
21
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

حجرة تبريد مائي 56×56 مم بجيب فارغ للمشتت 40×40×11 مم، وإطار مرفوع فوقه يثبّت قطعة بلتير 40×40 مم في مكانها مع فتحة للأسلاك، وأنبوبان جانبيان مرتفعان

Parameters

NameValueRange
Heat sink length and width40 mm30 – 50
Heat sink total height11 mm8 – 15
Heat sink base plate thickness2.5 mm1.5 – 5
Number of fins on the heat sink12 mm6 – 20
Fin thickness1.2 mm0.6 – 3
Pocket clearance per side0.25 mm0 – 0.5
Sink protrusion above the plastic rim0.25 mm0 – 1
Body length and width56 mm50 – 70
Floor thickness3 mm2 – 6
End wall thickness2.5 mm1.6 – 4
Guide wall thickness1 mm0.8 – 2
Separator fin number counted from each side5 mm2 – 8
Plenum corner radius2.5 mm1 – 4
Guide wall to end wall fillet2.5 mm1 – 4
Port bore diameter6 mm3 – 8
Barb outer diameter8 mm5 – 10
Barb length outside the body10 mm6 – 16
Peltier module thickness3.8 mm2 – 6
Frame height above the sink top2.5 mm1 – 5
Frame wall thickness2 mm1.2 – 4
Wire slot width in the frame5 mm3 – 10

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Peltier water cold plate 56mm - Free CAD Model (STEP, STL) | TextoCAD