Peg Stand

1 views

Bounding box: 218.1 × 105 × 90 mm
Engine: 3D Printing B-rep
Parameters: 13
Published: November 5, 2026

Download

Free to download and use. See the terms.

The prompt

Вот обьект длина 24 см ножки две на фото тоже по высоте такие же ровно должно быть толщина ножнек 4 см тунелеобразные ровные ширина 11.5 высота 9.5

Parameters

Name	Value	Range
Overall length	240 mm	100 – 400
Overall width	115 mm	50 – 300
Overall height	95 mm	40 – 200
Peg thickness across flats	40 mm	10 – 80
Distance between peg centers	60 mm	20 – 100
Peg center distance from front edge	40 mm	10 – 100
Chamfer on peg tops	5 mm	0 – 15
Base plate thickness	6 mm	3 – 20
Back block depth	60 mm	20 – 150
Back block flat top depth	25 mm	5 – 100
Back block front vertical height	40 mm	10 – 100
Inset of back block from base back edge	5 mm	0 – 20
Inset of back block from base side edges	5 mm	0 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS