Gears and transmission
Pedal Washing Machine Assembly
- Bounding box
- 1410.0 × 640.0 × 730.0 mm
- Engine
- Precision B-rep
- Parameters
- 47
- Published
- October 15, 2026
Download
Free to download and use. See the terms.
The prompt
The entire pedal-operated washing machine assembly is structured around a horizontal base frame measuring 1300 millimeters in length and 530 millimeters in width, featuring vertical corner pillars standing 725 millimeters high and tied together by 150 millimeters reinforced corner joints. Positioned at the rear of this frame is the sitting chair, which consists of a vertical support post and a horizontal saddle seat adjustable within a height range of 330 to 65.5 millimeters. Working in direct tandem with the chair, the holding frame features twin support pillars standing vertically at a height of 580 millimeters before curving through smooth ninety-degree arcs into a horizontal top crossbar grip. Power is supplied through a horizontal bottom bracket axle that connects to 170 millimeters crank arms rotating in a vertical plane. This mechanical energy is transferred via a horizontal longitudinal chain drive and transmission system that incorporates a variable chainring with a diameter of 7 to 12 and a multi-speed derailleur gear cluster. To smooth out pedaling dead spots, an intermediate smoothing flywheel measuring a diameter of 19 to 23 rotates vertically on the transmission shaft. At the front of the machine, a horizontal mounting platform supports a vertical cylindrical washing drum measuring 600 millimeters in diameter and 600 millimeters in height. Housed inside this drum are vertical internal agitation baffles designed to maximize fluid turbulence, alongside a bottom-mounted drain valve positioned at the lower base for efficient water evacuation.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 1300 mm | 800 – 2000 |
| Base Width | 530 mm | 300 – 1000 |
| Base Beam Height | 40 mm | 20 – 100 |
| Base Beam Width | 40 mm | 20 – 100 |
| Pillar Height | 725 mm | 400 – 1000 |
| Pillar Cross-Section | 40 mm | 20 – 80 |
| Corner Joint Size | 150 mm | 80 – 250 |
| Seat Height | 500 mm | 330 – 655 |
| Seat Post Diameter | 40 mm | 20 – 60 |
| Seat Length | 250 mm | 150 – 350 |
| Seat Width | 150 mm | 100 – 250 |
| Seat Thickness | 40 mm | 20 – 60 |
| Holding Frame Height | 580 mm | 400 – 800 |
| Holding Post Cross-Section | 40 mm | 20 – 60 |
| Top Crossbar Length | 300 mm | 200 – 500 |
| Top Crossbar Section | 40 mm | 20 – 60 |
| Post Gap | 300 mm | 150 – 450 |
| Bottom Bracket X Position | 100 mm | -200 – 400 |
| Bottom Bracket Height | 200 mm | 100 – 400 |
| Crank Arm Length | 170 mm | 100 – 250 |
| Crank Arm Section | 25 mm | 10 – 50 |
| Axle Diameter | 24 mm | 10 – 50 |
| Axle Length | 200 mm | 100 – 300 |
| Pedal Diameter | 30 mm | 20 – 50 |
| Pedal Length | 30 mm | 20 – 60 |
| Chainring Diameter | 250 mm | 180 – 300 |
| Chainring Thickness | 10 mm | 5 – 30 |
| Transmission Shaft X | 300 mm | 150 – 500 |
| Transmission Shaft Height | 280 mm | 150 – 450 |
| Rear Sprocket Diameter | 80 mm | 40 – 200 |
| Derailleur Gears | 3 mm | 2 – 7 |
| Flywheel Diameter | 520 mm | 480 – 580 |
| Flywheel Thickness | 50 mm | 20 – 100 |
| Drum Diameter | 600 mm | 400 – 800 |
| Drum Height | 600 mm | 400 – 800 |
| Drum Wall Thickness | 20 mm | 10 – 40 |
| Drum Bottom Thickness | 20 mm | 10 – 40 |
| Drum X Position | 300 mm | 200 – 450 |
| Baffle Count | 4 mm | 2 – 8 |
| Baffle Radial Length | 150 mm | 80 – 250 |
| Baffle Thickness | 20 mm | 10 – 40 |
| Baffle Height | 500 mm | 300 – 600 |
| Drain Valve Diameter | 50 mm | 30 – 80 |
| Drain Valve Height | 60 mm | 40 – 100 |
| Platform Length | 600 mm | 500 – 800 |
| Platform Width | 600 mm | 500 – 800 |
| Platform Height | 40 mm | 20 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled