Brackets and mounts
PCB Mounting Bracket
- Bounding box
- 120.0 × 90.0 × 13.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
A parametric PCB mounting bracket with four M3 screw holes at the corners, 80mm x 60mm base plate, 3mm thick, with two side rails 10mm high for card retention and a central cutout 50mm x 30mm for component clearance. Rounded corners radius 2mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Base length | 80 mm | 40 – 200 |
| Base width | 60 mm | 30 – 150 |
| Base thickness | 3 mm | 1 – 10 |
| Corner radius | 2 mm | 0.5 – 10 |
| Rail height | 10 mm | 2 – 30 |
| Rail thickness | 3 mm | 1 – 8 |
| Cutout length | 50 mm | 10 – 150 |
| Cutout width | 30 mm | 10 – 100 |
| Screw hole diameter | 3.2 mm | 2 – 6 |
| Hole offset from edge | 5 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent