Gears and transmission
Partner Halloween Trophy - Upright Gears and Split Bat
- Bounding box
- 90.0 × 40.0 × 90.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
The gears are standing upright and there are 2 bases. More definition on the bat
Parameters
| Name | Value | Range |
|---|---|---|
| Each Base Length (X) | 38 mm | 20 – 80 |
| Each Base Width (Y) | 40 mm | 20 – 80 |
| Base Height | 8 mm | 2 – 20 |
| Plaque Pocket Width | 25 mm | 10 – 40 |
| Plaque Pocket Height | 8 mm | 2 – 15 |
| Plaque Pocket Depth | 3 mm | 0 – 8 |
| Gear Module | 2 mm | 0.5 – 5 |
| Gear Teeth | 20 count | 8 – 60 |
| Gear Face Width | 10 mm | 3 – 25 |
| Gear Bore Diameter | 6 mm | 1 – 15 |
| Gear Center Clearance | 0 mm | 0 – 5 |
| Bat Half Wingspan | 45 mm | 20 – 100 |
| Bat Body Height | 30 mm | 15 – 60 |
| Bat Thickness | 8 mm | 2 – 20 |
| Bat/Gear Overlap | 2 mm | 0 – 10 |
| Split Gap | 2 mm | 0.5 – 10 |
| Wing Scallop Count | 3 count | 1 – 6 |
| Scallop Depth | 2 mm | 0.5 – 8 |
| Ear Height | 10 mm | 4 – 30 |
| Body Width | 16 mm | 6 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled