Everything else
Parkside to HBM 20V Battery Adapter with Battery Profile
- Bounding box
- 100.0 × 62.0 × 59.0 mm
- Engine
- Precision B-rep
- Parameters
- 41
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
quiero que hagas el perfil de la batería
Parameters
| Name | Value | Range |
|---|---|---|
| Body length (X) | 100 mm | 40 – 250 |
| Body width (Y) | 62 mm | 25 – 150 |
| Body height (Z) | 40 mm | 15 – 120 |
| Vertical corner radius | 3 mm | 0 – 15 |
| Socket width (lower) | 34 mm | 10 – 80 |
| Socket undercut width | 40 mm | 10 – 90 |
| Socket lip height | 5 mm | 0.5 – 20 |
| Socket depth | 12 mm | 2 – 40 |
| Socket length | 96 mm | 10 – 240 |
| Terminal pocket length | 30 mm | 5 – 80 |
| Terminal pocket width | 12 mm | 2 – 40 |
| Terminal pocket depth | 3 mm | 0.5 – 15 |
| Contact slot count | 4 pcs | 2 – 8 |
| Contact slot length | 8 mm | 2 – 30 |
| Contact slot width | 4 mm | 1 – 20 |
| Contact slot pitch | 10 mm | 3 – 40 |
| Tool foot width (lower) | 30 mm | 10 – 80 |
| Tool foot top width | 24 mm | 5 – 70 |
| Tool foot lip height | 4 mm | 0.5 – 15 |
| Tool foot height | 15 mm | 3 – 60 |
| Tool foot length | 24 mm | 5 – 80 |
| Latch notch length | 6 mm | 1 – 30 |
| Latch notch width | 4 mm | 1 – 20 |
| Latch notch depth | 2 mm | 0.5 – 10 |
| Release pocket length | 40 mm | 5 – 100 |
| Release pocket depth | 2 mm | 0.5 – 8 |
| Release pocket height | 8 mm | 2 – 30 |
| Release pocket Z centre | 7 mm | 1 – 60 |
| Mounting hole diameter | 4 mm | 2 – 10 |
| Mounting hole spacing X | 84 mm | 10 – 220 |
| Mounting hole spacing Y | 50 mm | 10 – 140 |
| Top edge bevel | 3 mm | 0 – 10 |
| Label plate length | 60 mm | 10 – 180 |
| Label plate height | 18 mm | 5 – 60 |
| Label plate corner chamfer | 6 mm | 0 – 12 |
| Label plate Z centre | 27 mm | 2 – 100 |
| Label plate recess depth | 1.2 mm | 0 – 5 |
| Base foot count | 4 pcs | 1 – 8 |
| Base foot width | 10 mm | 2 – 40 |
| Base foot height | 4 mm | 0.5 – 20 |
| Base foot pitch | 22 mm | 4 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm