Parametric Nintendo Switch Controller Organizer

1 views

Bounding box: 170.0 × 110.0 × 130.0 mm
Engine: Precision B-rep
Parameters: 21
Published: October 6, 2026

Download

Free to download and use. See the terms.

The prompt

Create a parametric Nintendo Switch controller organizer with a maximum footprint of 170 mm × 110 mm and maximum height of 130 mm. It must hold four individual Joy-Con controllers and two full-size Switch controllers. Divide the design into separate interlocking pieces that can be assembled without glue. Keep all dimensions editable and provide a dimensioned 2D drawing for every piece.”

Parameters

Name	Value	Range
Base Plate Length (X)	170 mm	60 – 300
Base Plate Width (Y)	110 mm	60 – 220
Base Plate Thickness	6 mm	2 – 20
Wall Thickness	6 mm	2 – 15
Wall Height	130 mm	40 – 200
Side Wall Length (Y)	110 mm	30 – 220
Back Wall Length (X)	170 mm	60 – 300
Joy-Con Rack Width	160 mm	40 – 280
Joy-Con Rack Depth	40 mm	10 – 80
Joy-Con Rack Height	110 mm	20 – 160
Joy-Con Slot Count	4 pcs	1 – 6
Joy-Con Slot Width	36 mm	5 – 80
Joy-Con Slot Pitch	40 mm	10 – 90
Joy-Con Slot Depth	100 mm	5 – 150
Cradle Width	160 mm	40 – 280
Cradle Depth	50 mm	15 – 100
Cradle Height	60 mm	15 – 120
Bay Width	70 mm	10 – 120
Bay Depth	50 mm	10 – 100
Bay Tilt Angle	15 deg	0 – 40
Bay Count	2 pcs	1 – 3

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS