Everything else
Parametric Modular Desk Organizer Base
- Bounding box
- 210.0 × 110.0 × 18.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric, 3D-printable CAD model of a premium modular desk organizer base. * Overall size: 210 × 110 × 10 mm * Add a 5 mm thick wall around all sides, extending 8 mm above the base * Inner usable area: approximately 200 × 100 mm * Rounded corners and softly filleted edges * Use 16 cylindrical magnet pockets for 8 × 3 mm round neodymium magnets * Magnet pockets: 8.2 mm diameter × 3.2 mm deep * Magnet layout: four 50 × 100 mm rectangular grid sections, forming one symmetric modular grid * The 50 × 100 mm rectangles are construction references only; do not model them as visible features * All modules must use the exact same magnetic interface and grid * Optimize for FDM printing with PLA, preferably without supports * Keep all dimensions and magnet positions fully parametric * Exportable as STEP and STL The result must be a precise functional CAD model, not a visual 3D render.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 210 mm | 150 – 400 |
| Overall Width | 110 mm | 80 – 300 |
| Base Thickness | 10 mm | 4 – 20 |
| Wall Thickness | 5 mm | 2 – 10 |
| Wall Height Above Base | 8 mm | 4 – 20 |
| Section Size X | 50 mm | 20 – 100 |
| Section Size Y | 100 mm | 20 – 150 |
| Sections Along X | 4 | 1 – 10 |
| Sections Along Y | 1 | 1 – 5 |
| Magnet Inset From Section Corner | 5 mm | 2 – 10 |
| Magnet Pocket Diameter | 8.2 mm | 6 – 12 |
| Magnet Pocket Depth | 3.2 mm | 1 – 6 |
| Corner Radius | 2 mm | 0 – 8 |
| Edge Fillet Radius | 0.8 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm