Parametric Conrod-Handle Mug Assembly

Create a complete 350 ml stainless steel classic car-themed mug with a separate connecting-rod (engine conrod) shaped handle. MUG: - Cylindrical stainless steel mug - Capacity: approximately 350 ml - Outer diameter: 80 mm - Height: 100 mm - Wall thickness: 1.5 mm - Open top - Closed flat bottom - Slightly rounded outer bottom edge - Smooth cylindrical body HANDLE: - One separate handle shaped like a realistic automotive engine connecting rod - The connecting rod should be mounted vertically on the side of the mug - Large circular opening at the upper end - Smaller circular opening at the lower end - Realistic mechanical connecting-rod proportions - Handle thickness: 6 mm - Handle width: approximately 25 mm - Overall handle height: approximately 90 mm - The handle should be positioned about 15 mm away from the mug body at its maximum point - Both ends of the connecting rod should connect cleanly to the mug body - Use simple solid mounting pads at the two connection points - Do NOT use ribs - Do NOT add extra decorative parts - Keep the design simple and suitable for 3D printing CONNECTION: - The connecting rod handle must be structurally connected to the mug at two points - Upper and lower mounting points should be integrated into the handle geometry - Use rounded fillets at the connection areas - Minimum fillet radius: 2 mm - Avoid sharp edges DESIGN: - Industrial automotive aesthetic - Inspired by a classic American car engine - Clean, manufacturable geometry - No logos - No text - No unnecessary details OUTPUT: - Generate the mug and connecting-rod handle as one complete CAD assembly - Keep the geometry editable and parametric - Make the model suitable for exporting as STEP and STL - Prioritize accurate dimensions and clean solid geometry over visual decoration

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.