45.277.213.8
Loading the interactive model…
Interactive 3D model of Parametric 3-pass cold plate chamber 5L-min concept

Everything else

Parametric 3-pass cold plate chamber 5L-min concept

1 views
Bounding box
77.2 × 45.2 × 13.8 mm
Engine
Precision B-rep
Parameters
29
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

Single piece chamber, 40x40 sink top insert fins down, 3-pass flow, high 6mm ports, 8mm hose barbs and RTV groove.

Parameters

NameValueRange
Body length57.2 mm50 – 65
Body width45.2 mm40 – 55
Body height13.75 mm12 – 16
Wall thickness2.5 mm1.5 – 4
Floor thickness2 mm1 – 3
Sink X start8.5 mm5 – 12
Sink pocket length40.2 mm38 – 42
Sink Y start2.5 mm1 – 4
Sink pocket width40.2 mm38 – 42
Cavity ceiling / sink base underside11.5 mm10 – 13
Sink fin count12 count8 – 16
Fin thickness1.2 mm0.8 – 1.8
Fin gap2.1 mm1.2 – 3.2
Sink base thickness2.5 mm1.5 – 3.5
Fin height8.5 mm7 – 10
Divider thickness1 mm0.7 – 1.5
Divider 1 center Y15.9 mm12 – 19
Divider 2 center Y29.3 mm26 – 33
Barb stem OD8 mm6 – 9
Barb length10 mm6 – 12
Port bore6 mm4.5 – 7
Retaining ridge OD9.2 mm8 – 10
Ridge start from tip6 mm4 – 8
Inlet Y9.2 mm5 – 14
Outlet Y36 mm30 – 40
Port center Z8.5 mm6 – 10
RTV groove width1.5 mm1 – 2
RTV groove depth1 mm0.5 – 1.5
Outer vertical corner radius0.5 mm0 – 1

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Parametric 3-pass cold plate chamber 5L-min concept - Free CAD Model (STEP, STL) | TextoCAD