Brackets and mounts
PANEX LINK Rev A Handheld Enclosure
- Bounding box
- 178.0 × 112.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- September 14, 2026
Download
Free to download and use. See the terms.
The prompt
Design a fully parametric, FDM-printable two-piece handheld enclosure in millimeters for the PANEX LINK Rev A PCB. Strictly follow the existing PCB layout; do not invent controls. Generate editable solid bodies, not meshes. Deliver views of the assembled unit, upper shell, lower shell, and cavity. Key Specifications: PCB & Cavity: PCB is exactly 166.4 x 99.75 mm. Internal cavity must be ~170.0 x 103.5 mm. Maintain ≥3 mm vertical clearance above the tallest components and a 2-3 mm wiring corridor around the edges. External Shell: ~178 x 112 mm footprint, 38-42 mm total height. Ergonomic with 3-6 mm external corner radii. Avoid overhangs/supports. Wall Thickness: 2.0 mm nominal; 2.5-3.0 mm around structural areas and bosses. Lower floor 2.0-2.5 mm. Mating Joint: Stepped tongue-and-groove lip (0.8-1.2 mm tall, 1.5-2.0 mm thick) with a parametric 0.35 mm mating clearance. PCB Mounting: PCB has no holes. Support it with a continuous 1.5-2.0 mm perimeter ledge and low-profile clips. Include optional/editable parametric mounting bosses for future use. Fasteners: 4-6 M3 bosses (5.5-6.0 mm OD) for heat-set inserts, positioned safely outside the PCB footprint. Top Face Features: Two FrSky M10 gimbals (Ø51 mm openings, ~120 mm apart, 15 mm vertical offset), a 2-inch TFT display opening with bezel, and exact cutouts for PCB-mounted switches/navigation. Port Access: USB-C (1.0 mm clearance) and MicroSD (with finger extraction space). Both must be externally accessible. RF & Power: Leave internal clearance for a removable MicroPowerCore module and wiring. Keep the Ebyte/ESP32 ELRS antenna area completely clear of dense plastic/ribs. Add an external antenna pigtail exit. Ventilation: Modest 1.5-2.0 mm slots placed safely away from the RF area, gimbals, and connectors.
Parameters
| Name | Value | Range |
|---|---|---|
| Footprint X | 178 mm | 100 – 300 |
| Footprint Y | 112 mm | 60 – 200 |
| Lower Shell Height | 20 mm | 10 – 40 |
| Upper Shell Height | 20 mm | 10 – 40 |
| Corner Radius | 5 mm | 1 – 15 |
| Cavity X | 170 mm | 100 – 280 |
| Cavity Y | 103.5 mm | 50 – 180 |
| Floor Thickness | 2.5 mm | 1 – 5 |
| Ledge Height | 2 mm | 0.5 – 5 |
| Ledge Width | 1.8 mm | 0.5 – 4 |
| PCB X | 166.4 mm | 100 – 280 |
| PCB Y | 99.75 mm | 50 – 180 |
| Boss Outer Diameter | 5.5 mm | 3 – 10 |
| Boss Insert Hole Diameter | 4 mm | 2 – 8 |
| Screw Hole Diameter | 3.2 mm | 2 – 6 |
| Gimbal Opening Diameter | 51 mm | 20 – 80 |
| Gimbal Spacing | 120 mm | 50 – 200 |
| Display Width | 45 mm | 20 – 100 |
| Display Height | 35 mm | 20 – 80 |
| USB-C Port Width | 9 mm | 4 – 20 |
| USB-C Port Height | 4 mm | 2 – 10 |
| MicroSD Port Width | 12 mm | 5 – 25 |
| MicroSD Port Height | 3 mm | 1 – 8 |
| Vent Slot Width | 2 mm | 0.5 – 5 |
| Vent Slot Length | 10 mm | 2 – 30 |
| Vent Slot Count | 4 | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent