Everything else
Pan-Tilt Servo Mount with Tilting Camera Cradle
- Bounding box
- 64.5 × 40.0 × 38.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- October 26, 2026
Download
Free to download and use. See the terms.
The prompt
now cna u use that to make the other shape that will go to inside the hole to connect but this will haver a 180 servomeaning it is supposed to turn up and down. this one will have a camera and a sero that will connect to it from the side.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length (X) | 60 mm | 30 – 150 |
| Base Width (Y) | 40 mm | 20 – 120 |
| Base Thickness | 4 mm | 2 – 12 |
| Pan Servo Boss Dia | 20 mm | 8 – 50 |
| Pan Servo Boss Height | 6 mm | 2 – 25 |
| Servo Screw Circle Dia | 12 mm | 4 – 40 |
| Servo Screw Hole Dia | 2.5 mm | 1 – 8 |
| Centre Shaft Hole Dia | 4 mm | 1 – 20 |
| Horn Recess Width | 3.5 mm | 1 – 12 |
| Horn Recess Length | 16 mm | 4 – 40 |
| Horn Recess Depth | 2.5 mm | 0.5 – 10 |
| Arm Thickness | 5 mm | 2 – 15 |
| Arm Height | 34 mm | 10 – 80 |
| Pivot Bore Dia | 5 mm | 2 – 15 |
| Pivot Height Above Base | 20 mm | 5 – 60 |
| Arm/Base Fillet Radius | 1.5 mm | 0 – 5 |
| Cradle Length (X) | 48 mm | 10 – 130 |
| Cradle Depth (Y) | 26 mm | 8 – 80 |
| Cradle Height (Z) | 24 mm | 8 – 60 |
| Pivot Pin Dia | 5.5 mm | 2 – 16 |
| Pin Protrusion Past Arm | 1.5 mm | 0 – 10 |
| Camera Lens Bore Dia | 14 mm | 2 – 40 |
| Camera Board Recess Dia | 20 mm | 2 – 44 |
| Camera Board Recess Depth | 3 mm | 0.5 – 10 |
| Side Servo Pad Thickness | 3 mm | 1 – 10 |
| Side Servo Pad Width | 34 mm | 10 – 60 |
| Side Servo Pad Height | 26 mm | 10 – 60 |
| Horn Clearance Bore Dia | 12 mm | 4 – 30 |
| Servo Screw Hole Dia | 2.2 mm | 1 – 6 |
| Servo Screw Spacing | 28 mm | 10 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm