Loading the interactive model…
Interactive 3D model of Pan-Tilt Camera Baseplate (Simplified)Gears and transmission
Pan-Tilt Camera Baseplate (Simplified)
7 views
- Bounding box
- 215.0 × 130.0 × 135.5 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
geared camera baseplate with all functional pan and tilt gear levels like the arrihead but plannes dor 3d printing and for cameras of 6kg maximum payload
Parameters
| Name | Value | Range |
|---|---|---|
| Base Diameter | 100 mm | 80 – 150 |
| Base Thickness | 10 mm | 5 – 20 |
| Tripod Mount Hole Dia (3/8-16) | 9.5 mm | 8 – 12 |
| Pan Ring OD | 120 mm | 100 – 150 |
| Pan Ring ID | 100 mm | 80 – 130 |
| Pan Ring Height | 15 mm | 10 – 30 |
| Housing Diameter | 130 mm | 110 – 160 |
| Housing Height | 40 mm | 30 – 60 |
| Tilt Bracket Width (X) | 100 mm | 80 – 150 |
| Tilt Bracket Depth (Y) | 80 mm | 60 – 120 |
| Tilt Bracket Height (Z) | 60 mm | 40 – 80 |
| Tilt Axis Diameter | 10 mm | 5 – 20 |
| Camera Plate Width (X) | 80 mm | 60 – 120 |
| Camera Plate Length (Y) | 60 mm | 40 – 100 |
| Camera Plate Thickness | 8 mm | 4 – 15 |
| Hole for 1/4-20 (mm) | 6.35 mm | 5 – 8 |
| Hole for 3/8-16 (mm) | 9.5 mm | 8 – 12 |
| Knob Diameter | 40 mm | 20 – 60 |
| Knob Height | 15 mm | 10 – 25 |
| Shaft Diameter | 8 mm | 4 – 15 |
| Shaft Length (Pan) | 50 mm | 30 – 70 |
| Shaft Length (Tilt) | 40 mm | 20 – 60 |
| Lever Handle Length | 60 mm | 40 – 80 |
| Lever Shaft Dia (M6 equivalent) | 6 mm | 4 – 10 |
| Lever Handle Dia | 10 mm | 6 – 15 |
| Gear Module (for reference) | 1.5 mm | 1 – 3 |
| Pan Ring Teeth | 120 | 60 – 200 |
| Pinion Teeth | 12 | 8 – 30 |
| Tilt Sector Teeth | 60 | 30 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
STEPSTLGLB16 PARAMS
Spur Gear (12 Teeth)
Built a gear with 12 teeth
STEPSTLGLB5 PARAMS
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
STEPSTLGLB7 PARAMS