Everything else
Packout DJI Drone Insert
- Bounding box
- 348.4 × 233.4 × 70 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
An insert that fits inside small Milwaukee packout and holds DJI Lito x3 + it's remote and 3extra batterys
Parameters
| Name | Value | Range |
|---|---|---|
| Packout interior length | 350 mm | 250 – 460 |
| Packout interior width | 235 mm | 160 – 360 |
| Clearance per side | 0.8 mm | 0.2 – 3 |
| Tray height | 70 mm | 30 – 120 |
| Outer wall thickness | 2.4 mm | 1.2 – 6 |
| Divider thickness | 2.4 mm | 1.2 – 6 |
| Floor thickness | 3 mm | 2 – 8 |
| Outer corner radius | 8 mm | 0 – 25 |
| Drone bay length X | 168 mm | 120 – 260 |
| Drone bay width Y | 125 mm | 70 – 200 |
| Number of battery slots | 3 mm | 1 – 5 |
| Battery slot depth Y | 50 mm | 30 – 120 |
| Raised battery floor height | 22 mm | 0 – 45 |
| Notch width | 40 mm | 20 – 80 |
| Notch depth | 26 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm