Brackets and mounts
Pachinko Playfield Chassis
- Bounding box
- 200.0 × 300.0 × 18.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- September 14, 2026
Download
Free to download and use. See the terms.
The prompt
super simple part with no internal mechanisms, just outer view, very basic. Concept 1: "Gravity Chute Pachinko" Chassis Layout & Form Factor A shallow inclined desktop unit. The main field uses a staggered grid of static rubber-capped aluminum standoffs, using basic gravity to return played balls to a central bottom tray. Key Features & Subsystems Launcher: A simple spring-loaded plunger (straight pull-rod with a rear compression spring and rubber tip) positioned on the bottom-right perimeter channel. Dose/Reload: A slanted gravity track with a mechanical single-ball rocker stop. Pushing the launcher rod back tilts the rocker to feed one 5/16" ball into the launching slot. Dynamic Obstacles (2 Required): Center Paddle Wheel: A 4-vane freely rotating wheel mounted on a low-friction shoulder bolt that spins and deflects balls as they descend. Bistable Tipping Bucket: A small center-pivoted dual-pocket tray. Landing a ball on the left dumps the ball and flips the tray to redirect the next shot to the right. Score Tracking & Reporting: A mechanical odometer drum. Balls drop into 3 bottom collection channels (10, 20, 50 points), each depressing a lever that advances a visible 2-digit numbered drum wheel. Game Reset: A single side push-bar that trips a trapdoor under the collection channels to drop all 10 balls back into the dosing track while resetting the odometer drum to 00.
Parameters
| Name | Value | Range |
|---|---|---|
| Field Width (X) | 200 mm | 80 – 400 |
| Field Height (Y) | 300 mm | 100 – 500 |
| Plate Thickness | 6 mm | 3 – 20 |
| Perimeter Wall Height | 12 mm | 4 – 40 |
| Perimeter Wall Thickness | 5 mm | 2 – 15 |
| Outer Corner Radius | 8 mm | 0 – 40 |
| Standoff Diameter | 8 mm | 3 – 25 |
| Standoff Height | 10 mm | 3 – 40 |
| Stagger Pitch (X) | 25 mm | 10 – 60 |
| Row Pitch (Y) | 30 mm | 10 – 60 |
| Standoff Rows | 9 count | 2 – 20 |
| Standoff Columns | 7 count | 2 – 20 |
| Rubber Cap Diameter | 11 mm | 3 – 30 |
| Rubber Cap Height | 2 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent