Brackets and mounts
Owl Camera Enclosure - 12 Separately Printable Parts
- Bounding box
- 653.5 × 210.5 × 295.5 mm
- Engine
- Precision B-rep
- Parameters
- 49
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
CAD owl, mm, separate named STEP solids; never fuse. Body210x204x245, wall3.6; FDM0.6, clearance0.5/side. Alternate black/grey feathers: EACH feather a solid touching shell, no overlaps, printed together. Ring eyes, black centers. Hidden camera D60 H97.5, bottomZ40; lens D18 at Z101, protrudes1. Black feather masks lens; flared aperture24-36, no obstructing rim. Front camera bay78x80x112: removable feather door, upper hooks/lower captive M3 screw; camera removes forward, no wires. Fixed partition3.6; rear electronics cover M3 screws. Exactly2 cells D27x71, reserve34x34x86 each rear sides. ESP40x70x12 reserve44x74x18 rear upper; power reserve54x40x20. Speaker70x30x20 above camera; sound cavity12, downward grille. Eyes2x D23x6. External vented rain hood sensor10x20x30. Rear DC socket5x20x10 with cap. Cable channels8x6, removable holders. Overlapping rain seams, gaskets/drains. Base210x200x12, body raised50; two side M6 friction pivots +/-15deg. Check fit/removal/collisions.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Layout Gap | 40 mm | 5 – 200 |
| Body Width | 210 mm | 100 – 400 |
| Body Depth | 204 mm | 100 – 400 |
| Body Height | 245 mm | 100 – 500 |
| Shell Wall | 3.6 mm | 1.2 – 10 |
| Body Raised On Base | 50 mm | 0 – 120 |
| Feather Length | 40 mm | 10 – 120 |
| Feather Width | 22 mm | 5 – 80 |
| Feather Thickness | 5 mm | 1 – 20 |
| Feather Count | 10 pcs | 4 – 40 |
| Eye Ring OD | 23 mm | 8 – 60 |
| Eye Black Center Dia | 13 mm | 2 – 40 |
| Eye Ring Thickness | 6 mm | 1 – 20 |
| Eye Centre Spacing | 60 mm | 20 – 150 |
| Camera Body Dia | 60 mm | 20 – 150 |
| Camera Height | 97.5 mm | 20 – 250 |
| Camera Bottom Z | 40 mm | 0 – 120 |
| Lens Dia | 18 mm | 4 – 60 |
| Lens Height Z | 101 mm | 0 – 250 |
| Lens Protrusion | 1 mm | 0.2 – 10 |
| Mask Flare Outer Dia | 36 mm | 10 – 80 |
| Mask Aperture Dia | 24 mm | 5 – 60 |
| Mask Thickness | 3 mm | 0.6 – 12 |
| Bay / Door Width | 78 mm | 20 – 200 |
| Bay / Door Height | 80 mm | 20 – 200 |
| Door Thickness | 3.6 mm | 1.2 – 12 |
| Captive M3 Screw Hole | 3 mm | 1.5 – 8 |
| Fixed Partition Thickness | 3.6 mm | 1.2 – 12 |
| Rear Cover Width | 110 mm | 30 – 250 |
| Rear Cover Height | 130 mm | 30 – 250 |
| Rear Cover Thickness | 3.6 mm | 1.2 – 12 |
| Cover M3 Screw Dia | 3 mm | 1.5 – 8 |
| Cover Screw Count | 8 pcs | 2 – 16 |
| Battery Cell Dia | 27 mm | 10 – 60 |
| Battery Cell Height | 71 mm | 20 – 150 |
| ESP Board Width | 40 mm | 10 – 120 |
| ESP Board Length | 70 mm | 10 – 200 |
| ESP Board Thickness | 12 mm | 2 – 60 |
| Power Board Width | 54 mm | 10 – 150 |
| Power Board Length | 40 mm | 10 – 150 |
| Power Board Thickness | 20 mm | 2 – 60 |
| Speaker Width | 70 mm | 20 – 200 |
| Speaker Depth | 30 mm | 10 – 150 |
| Speaker Height | 20 mm | 8 – 80 |
| Sound Cavity Depth | 12 mm | 3 – 40 |
| Base Width | 210 mm | 100 – 400 |
| Base Depth | 200 mm | 100 – 400 |
| Base Height | 12 mm | 4 – 60 |
| M6 Friction Pivot Dia | 6 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu