Brackets and mounts
Outdoor Dual-Camera Enclosure Assembly
- Bounding box
- 3480.0 × 120.0 × 90.0 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- August 10, 2026
Download
Free to download and use. See the terms.
The prompt
Design a commercial outdoor dual-camera AI sports analytics enclosure for pole mounting. Overall dimensions: 240 × 120 × 90 mm. Material: die-cast aluminum with 3 mm wall thickness, matte black powder-coated finish, IP65 rated. The front panel has two recessed circular camera openings (28 mm diameter, 130 mm center-to-center) behind a single AR-coated tempered glass window. Cameras are independently adjustable (±15° pan, ±10° tilt) and locked using socket screws. Place a small status LED between the cameras. The enclosure houses a 170 × 120 mm PCB containing an RK3588S compute module, Lattice CrossLink-NX FPGA, LPDDR4 memory, NVMe SSD, PoE power section, and Wi-Fi module. Mount the PCB on four M3 brass standoffs with cable routing channels and internal mounting bosses. Use the enclosure as a passive heatsink with integrated top cooling fins (8 mm high). Include an internal aluminum heat spreader contacting the RK3588S through a thermal pad. No active fan. Rear panel includes one waterproof RJ45 PoE connector, one USB-C service port with rubber cover, pressure equalization vent, reset pinhole, and cable strain relief. The mounting system consists of a heavy-duty two-piece aluminum pole clamp supporting 60–100 mm poles, using four M6 stainless steel bolts, EPDM rubber inserts, and adjustable ±20° tilt and ±30° pan with serrated locking teeth. Design for die-cast manufacturing with rounded corners, reinforcing ribs, uniform wall thickness, removable top cover secured by eight M4 screws, silicone gasket, and easy service access to the PCB and SSD. Generate an isometric view, exploded assembly, sectional view showing internal component placement, and pole-mounted assembly.
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Length | 240 mm | 200 – 300 |
| Enclosure Width | 120 mm | 100 – 150 |
| Enclosure Height | 90 mm | 70 – 120 |
| Wall Thickness | 3 mm | 2 – 5 |
| Edge Fillet Radius | 6 mm | 1 – 10 |
| Glass Window Length | 170 mm | 150 – 200 |
| Glass Window Width | 50 mm | 40 – 60 |
| Glass Thickness | 3 mm | 2 – 5 |
| Camera Lens Diameter | 28 mm | 20 – 35 |
| Camera Module Length | 40 mm | 30 – 50 |
| Camera Center Spacing | 130 mm | 100 – 150 |
| Camera Pan Angle | 0 deg | -15 – 15 |
| Camera Tilt Angle | 0 deg | -10 – 10 |
| LED Diameter | 5 mm | 3 – 8 |
| LED Dome Height | 2.5 mm | 1 – 4 |
| PCB Length | 170 mm | 150 – 200 |
| PCB Width | 120 mm | 100 – 150 |
| PCB Thickness | 1.6 mm | 1 – 3 |
| Standoff Height | 12 mm | 8 – 20 |
| Standoff Outer Diameter | 6 mm | 4 – 8 |
| Standoff Hole Diameter | 2.5 mm | 2 – 3 |
| Heat Spreader Length | 100 mm | 80 – 120 |
| Heat Spreader Width | 100 mm | 80 – 120 |
| Heat Spreader Thickness | 3 mm | 1 – 5 |
| Thermal Pad Length | 25 mm | 20 – 30 |
| Thermal Pad Width | 25 mm | 20 – 30 |
| Thermal Pad Thickness | 1.5 mm | 0.5 – 3 |
| Rear I/O Panel Width | 100 mm | 80 – 120 |
| Rear I/O Panel Height | 40 mm | 30 – 50 |
| RJ45 Protrusion | 25 mm | 15 – 35 |
| Pole Diameter | 80 mm | 60 – 100 |
| Clamp Width (Z) | 40 mm | 30 – 50 |
| Clamp Radial Thickness | 10 mm | 5 – 15 |
| M6 Bolt Diameter | 6 mm | 4 – 8 |
| Bolt Length | 45 mm | 30 – 60 |
| Layout Gap | 300 mm | 200 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent