OTTM 102 to OTTM 114 Adapter (Переводник)

1 views

Bounding box: 116 × 116 × 230 mm
Engine: 3D Printing B-rep
Parameters: 22
Published: October 31, 2026

Download

Free to download and use. See the terms.

The prompt

модель не соответствует чертежу, необходимо переделать

Parameters

Name	Value	Range
Overall length	230 mm	150 – 300
Left collar diameter	116 mm	80 – 160
Left collar land length	8 mm	2 – 30
External thread diameter	103.8 mm	60 – 140
Threaded length	72 mm	20 – 120
Thread relief groove diameter	94.8 mm	50 – 130
Thread relief groove width	2 mm	1 – 8
Middle body diameter	114.3 mm	60 – 160
Right end diameter	111.88 mm	60 – 160
Right end section length	50 mm	10 – 100
Left bore diameter	98.4 mm	40 – 120
Left bore straight length	34 mm	10 – 100
Through bore diameter	89 mm	30 – 110
Right counterbore diameter	111.1 mm	40 – 140
Right counterbore depth	42 mm	10 – 120
Right mouth bore diameter	108.38 mm	40 – 140
Left collar taper	35 deg	10 – 60
OD step cone half-angle	60 deg	20 – 85
Internal transition cone	65 deg	20 – 85
Right mouth cone	70 deg	20 – 85
Left seat cone included angle	80 deg	20 – 89
Left lead-in cone	18 deg	5 – 45

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS