Brackets and mounts
Ornate Four-Pillar Temple Finial with Concealed Bottle-Neck Socket
- Bounding box
- 34.0 × 34.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 52
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
6. Ornamentation: Use real solid geometry for fluting, rings, grooves, floral motifs and raised borders, not textures alone. Keep details symmetrical, crisp and sufficiently thick for moulding. Avoid fragile projections and excessive complexity. 7. Finish: Design for ABS plastic with an antique metallic gold or champagne-gold finish, polished raised edges and darker recessed details. Treat appearance separately from CAD geometry. 8. Mounting socket: Add a concealed underside socket centred on the cap. Make diameter, depth, clearance and wall thickness editable. Use placeholder fitting dimensions until actual bottle-neck or pump measurements are provided. Do not penetrate the exterior. 9. Manufacturing: Apply suitable draft angles, rounded internal corners, reasonably uniform walls and manufacturable relief depths. Minimise thick sections, trapped undercuts, fragile details and unnecessary material. Flag features requiring mould-maker review. 10. Feature tree: Organise editable sketches and features into base, borders, pillar, shaft, capital, four-pillar pattern, beams, roof eaves, individual roof tiers, ornamentation, finial, mounting socket and finishing operations. Use extrusions, revolutions, patterns, mirrors, fillets, chamfers and Boolean operations as appropriate.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Width | 34 mm | 15 – 80 |
| Overall Height | 60 mm | 30 – 120 |
| Lower Plinth Height | 4 mm | 1 – 12 |
| Upper Plinth Height | 3 mm | 1 – 10 |
| Upper Plinth Width | 26 mm | 10 – 70 |
| Shrine Cell Width | 18 mm | 6 – 50 |
| Shrine Cell Height | 14 mm | 4 – 40 |
| Niche Width | 6 mm | 2 – 20 |
| Niche Spring Height | 5 mm | 1 – 20 |
| Niche Depth | 1.2 mm | 0.4 – 5 |
| Pillar Offset | 9.5 mm | 3 – 30 |
| Shaft Diameter | 3.2 mm | 1 – 12 |
| Pedestal Width | 5 mm | 2 – 15 |
| Pedestal Height | 3 mm | 1 – 10 |
| Capital Width | 5 mm | 2 – 15 |
| Capital Height | 2.5 mm | 1 – 8 |
| Flute Count | 8 count | 0 – 24 |
| Flute Diameter | 0.7 mm | 0.1 – 3 |
| Ring Height | 0.7 mm | 0.2 – 3 |
| Ring Protrusion | 0.9 mm | 0.1 – 3 |
| Beam Width | 3 mm | 1 – 10 |
| Beam Height | 2.2 mm | 1 – 8 |
| Beam Relief Size | 0.7 mm | 0.2 – 2.5 |
| Cornice Height | 2.5 mm | 1 – 8 |
| Cornice Width | 24 mm | 8 – 60 |
| Roof Tier Count | 4 count | 1 – 7 |
| Roof Tier Height | 3 mm | 1 – 10 |
| Roof Tier Inset | 2.4 mm | 0.5 – 8 |
| Roof Base Width | 21 mm | 8 – 60 |
| Eave Overhang | 1.8 mm | 0 – 6 |
| Roof Relief Count | 3 count | 1 – 6 |
| Roof Relief Size | 0.9 mm | 0.3 – 2.5 |
| Neck Diameter | 6 mm | 2 – 20 |
| Neck Height | 2.5 mm | 0.5 – 10 |
| Finial Disc Diameter | 9 mm | 2 – 25 |
| Finial Disc Height | 1.6 mm | 0.4 – 6 |
| Finial Ball Diameter | 7 mm | 2 – 20 |
| Socket Bore Diameter | 12 mm | 3 – 40 |
| Socket Depth | 16 mm | 2 – 50 |
| Socket Radial Clearance | 0.6 mm | 0 – 3 |
| Socket Wall Thickness | 3 mm | 1 – 10 |
| Socket Mouth Depth | 3 mm | 0.5 – 10 |
| Lotus Petal Count | 8 count | 0 – 16 |
| Lotus Petal Size | 1.8 mm | 0.5 – 4 |
| Body Groove Count | 2 count | 0 – 5 |
| Body Groove Width | 0.9 mm | 0.2 – 3 |
| Body Groove Depth | 0.6 mm | 0.1 – 2 |
| Beam Border Width | 0.7 mm | 0.2 – 2.5 |
| Beam Border Height | 0.5 mm | 0.1 – 2 |
| Beam Rosette Diameter | 2.2 mm | 0 – 6 |
| Cornice Chamfer | 0.5 mm | 0 – 2 |
| Base Moulding Draft | 1.5 deg | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu