Gears and transmission
Organicco Paddle Mixer 4150mm + Metered 2-3t Hopper + DN150 Digestate Inlet V2
- Bounding box
- 4150.0 × 1870.0 × 3740.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Paddle mixer/hopper 3D concept with improved 4150mm frame length. 15kW motor and ZQ400 gearbox placeholders, 3000mm paddle mixer, trough, shaft, paddles and inspection lids; freestanding rectangular open-top hopper 1800 x 1700 with 900 straight and 1150 taper toward 420mm throat, nominal volume approx 4.3m3. Load-cell supports, emergency isolation slide gate, motorised rotary feeder, independent 168.3mm OD nominal DN150 digestate inlet and valve. Must confirm OEM paddle layout/clearances, bulk material properties, hopper flow and feeder accuracy, load, control sensors, supports. Not fabrication approved.
Parameters
| Name | Value | Range |
|---|---|---|
| Paddle mixer overall frame length | 4150 mm | 4150 – 4150 |
| Paddle mixer overall frame width provisional | 1300 mm | 1300 – 1300 |
| Paddle mixer reference overall height | 1048 mm | 1048 – 1048 |
| Mixer trough indicative length | 3000 mm | 3000 – 3000 |
| DN150 digestate outside diameter provisional | 168.3 mm | 168.3 – 168.3 |
| Rectangular hopper length | 1800 mm | 1800 – 1800 |
| Rectangular hopper width | 1700 mm | 1700 – 1700 |
| Hopper upper straight height | 900 mm | 900 – 900 |
| Hopper funnel height | 1150 mm | 1150 – 1150 |
| Provisional hopper plate thickness | 8 mm | 8 – 8 |
| Hopper square throat | 420 mm | 420 – 420 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled