Brackets and mounts
Orange Pi 5 Plus Bottom Plate
- Bounding box
- 100.0 × 75.0 × 1.5 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 27, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 2D DXF flat sheet metal layout for an Orange Pi 5 Plus bottom plate. Outer dimensions are 100mm by 75mm with rounded corners. It needs 4 mounting holes for M3 screws matching the official layout, but DO NOT include any cutout or slot for the micro SD card.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 100 mm | 50 – 150 |
| Width | 75 mm | 40 – 120 |
| Corner Radius | 5 mm | 1 – 15 |
| Thickness | 1.5 mm | 0.5 – 5 |
| Hole Diameter | 3.2 mm | 2 – 6 |
| Hole Inset X | 5 mm | 1 – 20 |
| Hole Inset Y | 5 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent