Brackets and mounts
OPGW Cable Route Assembly
- Bounding box
- 210.0 × 13.5 × 223.3 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 25, 2026
Download
Free to download and use. See the terms.
The prompt
Draw a overhead OPGW wire cable route,two route in single electrical route,each route is 20.5km,in each pole there 2m raised bar bracket with cap as i will share on picture which is used to hold OPGW cable,distance from one pole to another is 80m,height of concrete pole is 15m,in every 4.5km there must be a OPGW junction box to join the comming cable and ongoing cable,at first from the substation there 400m of ADDS fiber cable join with OPGW cable and at the end the OPGW cable join with ADDS fiber cable going to the destination substation,on the drawing show the ADSS fiber goes about 1.5m underground to the subatations
Parameters
| Name | Value | Range |
|---|---|---|
| Pole Height (scaled) | 15 mm | 10 – 20 |
| Pole Spacing (scaled) | 80 mm | 50 – 100 |
| Route Length (scaled) | 205 mm | 150 – 250 |
| Bracket Height (scaled) | 2 mm | 1 – 5 |
| Cable Diameter (scaled) | 0.5 mm | 0.2 – 1 |
| Junction Box Spacing (scaled) | 45 mm | 30 – 60 |
| Underground Depth (scaled) | 1.5 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent