Brackets and mounts
Open-Top Electronics Chassis with Motor and Fan Features
- Bounding box
- 320.0 × 220.0 × 246.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single contiguous open-top rectangular chassis made of solid walls. Dimensions: outer width 220 mm, length 320 mm, height 180 mm, with the top completely open. Add the following features: 1. BOTTOM MOTOR PLATFORM: - Add a centered 100 x 100 x 8 mm platform at the bottom. - Add four vertical support posts around the platform for an RS-550 motor, with a 38 mm internal diameter clearance, shaft pointing upward, and M4 clearance holes. 2. CONTROLLER COMPARTMENT: - Create an adjacent empty internal space measuring 180 x 120 x 150 mm for electronics. 3. COOLING FANS: - Add two lateral fan cutouts connected to the controller space. - Each cutout: 105 x 105 mm with four 4.5 mm mounting holes in a 105 x 105 mm pattern (for 120x120x25 mm fans). One side as air intake, opposite side as air exhaust. 4. CABLE PASS-THROUGH HOLES: - Add four 20 mm diameter through-holes near the motor and controller areas.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length | 320 mm | 280 – 500 |
| Outer Width | 220 mm | 180 – 400 |
| Outer Height | 180 mm | 100 – 300 |
| Wall Thickness | 6 mm | 3 – 12 |
| Motor Platform Size | 100 mm | 60 – 150 |
| Motor Platform Height | 8 mm | 4 – 20 |
| Motor Clearance Diameter | 38 mm | 20 – 60 |
| M4 Clearance Hole Diameter | 4.5 mm | 4 – 6 |
| Support Post Radius | 5 mm | 3 – 10 |
| Support Post Height | 60 mm | 20 – 100 |
| Controller Compartment Length | 180 mm | 100 – 300 |
| Controller Compartment Width | 120 mm | 80 – 200 |
| Controller Compartment Height | 150 mm | 100 – 200 |
| Controller X Offset | 60 mm | -100 – 150 |
| Fan Cutout Size | 105 mm | 80 – 120 |
| Fan Mount Hole Diameter | 4.5 mm | 4 – 6 |
| Fan Mount Pattern Size | 105 mm | 80 – 120 |
| Fan X Center | 60 mm | -100 – 150 |
| Fan Z Center | 90 mm | 40 – 140 |
| Cable Hole Diameter | 20 mm | 10 – 40 |
| Cable Hole Count | 4 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu