Brackets and mounts
Open-top box with USB, LED, and MQ-2 sensor mount
- Bounding box
- 114.5 × 70.0 × 50.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- August 25, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rectangular open-top box with outer dimensions 110mm x 70mm x 50mm, wall thickness 2.5mm. On the front wall, add a 12mm circular hole for USB entry. On the back wall, add a 5mm circular hole for LED. On the right side wall, add a 20mm circular hole and a flange mount with 4 screw holes for an MQ-2 sensor.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length | 110 mm | 50 – 200 |
| Outer Width | 70 mm | 30 – 150 |
| Outer Height | 50 mm | 20 – 120 |
| Wall Thickness | 2.5 mm | 1 – 10 |
| USB Hole Diameter | 12 mm | 5 – 30 |
| LED Hole Diameter | 5 mm | 2 – 20 |
| MQ-2 Hole Diameter | 20 mm | 5 – 50 |
| MQ-2 Screw Hole Diameter | 3.2 mm | 2 – 8 |
| MQ-2 Screw Spacing | 30 mm | 10 – 60 |
| MQ-2 Flange Thickness | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent