Brackets and mounts
Open-Frame GPU Enclosure
- Bounding box
- 220 × 120 × 140 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rectangular open-frame GPU enclosure. Overall dimensions: - Length: 220 mm - Height: 140 mm - Width: 120 mm Requirements: - Wall thickness: 5 mm. - Completely open on the front and rear ends. Do not create front or rear panels. - Keep only the top, bottom, left side, and right side walls. - The enclosure must be hollow. - Use straight rectangular walls with no rounded corners. - Add a 5 mm wide rectangular slot in the bottom panel near one end for the lower tabs of a standard PCIe GPU mounting bracket. - The GPU will be mounted vertically inside the enclosure. - Leave both open ends unobstructed for mounting cooling fans later. - Do not add a lid. - Do not add decorative features. - Do not add the GPU or fans yet.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 220 mm | 100 – 400 |
| Width | 120 mm | 50 – 300 |
| Height | 140 mm | 50 – 300 |
| Wall thickness | 5 mm | 2 – 10 |
| PCIe tab slot width | 5 mm | 3 – 10 |
| PCIe tab slot length | 12 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu