Brackets and mounts
Open-Frame Camera PCB Enclosure
- Bounding box
- 58.0 × 58.0 × 13.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 20, 2026
Download
Free to download and use. See the terms.
The prompt
"Design a two-piece open-frame enclosure for a 38mm by 38mm square camera PCB. The front frame must have a 25mm circular cutout to clear an M12 lens barrel. The side walls must be open pillars to maximize airflow for passive cooling. The base plate must be flat and thick, extending 10mm past the camera footprint to provide a wide, smooth surface area for mounting adhesive tape. Include 4 inner corner standoffs with 2mm holes to mount the PCB."
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Length | 58 mm | 40 – 120 |
| Base Plate Width | 58 mm | 40 – 120 |
| Base Plate Thickness | 3 mm | 1.5 – 10 |
| Base Corner Fillet | 1 mm | 0.25 – 3 |
| PCB Footprint (square) | 38 mm | 20 – 80 |
| PCB Hole Inset From Board Edge | 3 mm | 1 – 10 |
| Standoff Diameter | 6 mm | 3 – 12 |
| Standoff Height | 5 mm | 2 – 15 |
| PCB Mounting Hole Diameter | 2 mm | 1 – 5 |
| Front Frame Height | 10 mm | 5 – 30 |
| Frame Top Plate Thickness | 3 mm | 1.5 – 8 |
| Corner Pillar Cross-Section | 6 mm | 3 – 15 |
| M12 Lens Cutout Diameter | 25 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu