Brackets and mounts
One-Handed Post Hole Digger
- Bounding box
- 302.0 × 140 × 1310.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
One-handed post hole digger mechanical assembly in millimeters. Vertical main tube: 25.4 mm outer diameter, 1000 mm height, with a centered horizontal T-handle bar at the top (25.4 mm diameter, 250 mm long). Sliding cylindrical collar around the middle of the vertical tube: 34 mm outer diameter, 26 mm inner diameter, 120 mm height, with two opposite mounting tabs. Helical compression spring around the vertical tube below the collar: 34 mm outer diameter, 4.5 mm wire thickness, 150 mm length. Two opposing curved digging blades at the bottom: each blade is a semi-cylindrical steel scoop 240 mm tall, 140 mm wide, 3.5 mm thick, hinged at a central bottom pivot block on the main tube. Two flat connecting link bars (240 mm long, 20 mm wide, 4 mm thick) connecting the collar tabs to the upper pivot ears of each curved digging blade.
Parameters
| Name | Value | Range |
|---|---|---|
| Main tube outer diameter | 25.4 mm | 20 – 40 |
| Main tube length | 1000 mm | 600 – 1500 |
| T-handle bar diameter | 25.4 mm | 20 – 40 |
| T-handle bar length | 250 mm | 150 – 400 |
| Sliding collar outer diameter | 34 mm | 28 – 50 |
| Sliding collar inner diameter | 26 mm | 21 – 40 |
| Sliding collar height | 120 mm | 60 – 200 |
| Spring outer diameter | 34 mm | 26 – 50 |
| Spring wire diameter | 4.5 mm | 2 – 8 |
| Spring free length | 150 mm | 80 – 250 |
| Pivot block width | 40 mm | 30 – 70 |
| Pivot block depth | 40 mm | 30 – 70 |
| Pivot block height | 50 mm | 30 – 90 |
| Blade height | 240 mm | 150 – 350 |
| Blade width | 140 mm | 90 – 220 |
| Blade wall thickness | 3.5 mm | 2 – 8 |
| Blade opening angle | 14 deg | 0 – 30 |
| Connecting link length | 240 mm | 150 – 350 |
| Connecting link width | 20 mm | 10 – 40 |
| Connecting link thickness | 4 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Hydraulic Wing and Flaperon Demonstrator
Create a parametric 3D CAD model of a hydraulic aircraft wing and movable flaperon based on the reference sketch. **Wing dimensions:** - 240 mm chord, 120 mm span, 48 mm thickness
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
