Everything else
Oil-Spill Remediation Catamaran ASV
- Bounding box
- 2432.8 × 1749.0 × 1957.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Generate the CAD design for this prototype
Parameters
| Name | Value | Range |
|---|---|---|
| Length Overall | 2400 mm | 1200 – 4000 |
| Pontoon Beam | 350 mm | 150 – 700 |
| Pontoon Depth | 550 mm | 200 – 900 |
| Clear Gap Between Hulls | 1000 mm | 300 – 2000 |
| Freeboard (deck above waterline) | 300 mm | 100 – 700 |
| Bridge Deck Length | 1800 mm | 800 – 2400 |
| Deck Thickness | 30 mm | 10 – 80 |
| Tank Corner Fillet | 20 mm | 0 – 60 |
| Tank Centre Position (from stern) | 700 mm | 300 – 1800 |
| Tank Length | 480 mm | 200 – 900 |
| Tank Width | 310 mm | 150 – 600 |
| Tank Height | 270 mm | 120 – 600 |
| Tank Offset From Centreline | 260 mm | 120 – 450 |
| Wheel Diameter | 400 mm | 150 – 700 |
| Wheel Width | 200 mm | 60 – 400 |
| Axle Spacing (wheelbase) | 1150 mm | 400 – 2000 |
| Axle Drop Below Hull Bottom | 150 mm | 50 – 350 |
| Brush Drum Position (from stern) | 1950 mm | 1200 – 2400 |
| Brush Drum Height | -60 mm | -150 – 200 |
| Brush Drum Diameter | 260 mm | 100 – 500 |
| Brush Drum Width | 360 mm | 100 – 900 |
| Brush Rib Count | 7 pcs | 1 – 15 |
| Spray Boom Position (from stern) | 200 mm | 0 – 900 |
| Spray Boom Length | 1600 mm | 1400 – 2000 |
| Spray Boom Diameter | 40 mm | 15 – 90 |
| Boom Height Above Deck | 400 mm | 150 – 900 |
| Nozzle Count | 8 pcs | 2 – 16 |
| Sensor Mast Position (from stern) | 1500 mm | 400 – 2000 |
| Sensor Mast Height | 1000 mm | 300 – 2000 |
| Mast Diameter | 50 mm | 20 – 120 |
| EO/IR Gimbal Ball Diameter | 130 mm | 60 – 250 |
| GNSS Antenna Spacing | 220 mm | 80 – 400 |
| GNSS Antenna Diameter | 120 mm | 40 – 250 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm