Everything else
Octagonal Machine Base with Guard Walls
- Bounding box
- 150 × 80 × 48 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
設計一款小型機器的底下結構，底下為八角長方形，兩片大擋牆在左右邊，需要有橡膠防止刮傷，底部有鐵片配重支撐，尺寸大概150cmx80cm
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length, X | 150 mm | 80 – 400 |
| Overall width, Y | 80 mm | 50 – 250 |
| Octagon corner cut | 22 mm | 5 – 60 |
| Base plate thickness | 10 mm | 4 – 20 |
| Wall height above base top | 35 mm | 10 – 90 |
| Wall thickness at its foot | 7 mm | 3 – 16 |
| Inward taper of each wall face | 1.5 mm | 0 – 5 |
| Wall end inset from corner chamfer | 6 mm | 0 – 30 |
| Total shortening of wall at its top | 4 mm | 0 – 20 |
| Steel plate length, X | 110 mm | 30 – 300 |
| Steel plate width, Y | 50 mm | 20 – 200 |
| Steel plate thickness | 6 mm | 2 – 15 |
| Gasket thickness below base | 3 mm | 1 – 8 |
| Gasket ring width | 12 mm | 5 – 30 |
| Gasket inset from base outline | 3 mm | 0 – 20 |
| Mounting hole diameter | 4.5 mm | 2 – 10 |
| Half spacing of holes in X | 60 mm | 10 – 200 |
| Half spacing of holes in Y | 22 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm