Everything else
Oblong Dish with Reinforced Handles
- Bounding box
- 559.1 × 159.4 × 79.7 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- August 31, 2026
Download
Free to download and use. See the terms.
The prompt
14" long 3" deep oblong dish with 2 handles on each end. Thickness of the walls should be 3.5mm with no sharp edges. The outside of the dish should have a ballpeen hammer finish. The inside should have a machine ground finish. The handles should be reinforced as to not snap from high stress where it attaches to the dish, nor in the middle of the handle span
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 355.6 mm | 200 – 500 |
| Width | 152.4 mm | 100 – 300 |
| Depth | 76.2 mm | 50 – 150 |
| Wall Thickness | 3.5 mm | 2 – 10 |
| Handle Length | 100 mm | 50 – 200 |
| Handle Width | 25 mm | 15 – 50 |
| Handle Thickness | 10 mm | 5 – 20 |
| Fillet Radius | 5 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like