Brackets and mounts
Noctilio WIG-30
- Bounding box
- 360.0 × 330.0 × 56.5 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Project Noctilio WIG-30: A micro ground effect vehicle (WIG/ekranoplan) in flying wing configuration. GEOMETRY: - Planform: Strict trapezoid (NOT diamond/rhombus) - Front leading edge span: 300mm (wider) - Rear trailing edge span: 150mm (narrower) - Chord length (front to back): 180mm - Leading edge sweep: 20° backward (straight line, no curves) - Trailing edge: completely straight, perpendicular to centerline - Airfoil: Clark Y with flat bottom surface - Dihedral angle: 2-3° (wingtips slightly higher than center) FLOATS/ENDPLATES: - Two vertical floats running along entire side edges - Length: 180mm (full span of side edge) - Width: 30mm - Height: 50mm at front, tapering to 20mm at rear - Orientation: strictly vertical (perpendicular to water), NOT angled - Function: act as both floats and wingtip endplates MOTORS: - 4 small brushless motors (HUXUAN 716 size) - All mounted on TOP surface of wing, in central thick section - Front pair: 220mm apart, 25mm behind leading edge, horizontal - Rear pair: 120mm apart, 25mm ahead of trailing edge, tilted 3-5° downward - Motor pylons: aerodynamic cylinders, 18mm tall, 20mm diameter base - Pylon bases have smooth fillet (R3-4mm) blending into wing surface - Protective ring around each motor: 38mm diameter, 3-4mm tall HATCH: - Flat rectangular hatch on top center surface - Size: 40mm x 30mm - Position: at 25-30% chord from leading edge (center of gravity) - Flush with wing surface, with 1.5mm recessed lip COLOR/TEXTURE: - Body: dark matte gunmetal gray (RAL 7021) - Motor pylons: same gray with subtle silver metallic edges - Logo on hatch: silver bat silhouette (Noctilio leporinus) - Propellers: silver/chrome NEGATIVE (DO NOT INCLUDE): - No fuselage or gondola - No tail section or horizontal stabilizers - No vertical fin or rudder - No diamond/rhombus shape (must be trapezoid) - No hump or raised center section - No motor mounts at wingtips - No tilted floats (must be vertical)
Parameters
| Name | Value | Range |
|---|---|---|
| Front Span | 300 mm | 100 – 600 |
| Rear Span | 150 mm | 50 – 400 |
| Chord (Root) | 180 mm | 80 – 400 |
| Max Thickness | 12 mm | 5 – 30 |
| Dihedral Angle | 2.5 deg | 0 – 10 |
| Float Length | 180 mm | 100 – 300 |
| Float Width | 30 mm | 10 – 60 |
| Front Float Height | 50 mm | 20 – 80 |
| Rear Float Height | 20 mm | 10 – 50 |
| Pylon Height | 18 mm | 10 – 40 |
| Pylon Diameter | 20 mm | 10 – 40 |
| Motor Body Diameter | 7 mm | 5 – 15 |
| Motor Body Length | 16 mm | 10 – 30 |
| Ring Diameter | 38 mm | 20 – 60 |
| Ring Height | 4 mm | 2 – 10 |
| Hatch Length | 40 mm | 20 – 80 |
| Hatch Width | 30 mm | 15 – 60 |
| Hatch Position (% chord) | 27.5 % | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent