Everything else
NOAH XO Custom Audio Rack Case
- Bounding box
- 311 × 254 × 267 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
There needs to be a lip to install an LED light, as shown in the photo reference
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 305 mm | 150 – 420 |
| Overall depth | 254 mm | 120 – 400 |
| Overall height | 267 mm | 150 – 420 |
| Panel thickness | 5 mm | 3 – 10 |
| Foot height | 8 mm | 3 – 20 |
| Honeycomb cell pitch | 15 mm | 9 – 30 |
| Solid border around honeycomb | 14 mm | 6 – 40 |
| Device opening width | 250 mm | 80 – 400 |
| Gap above/below device openings | 9 mm | 3 – 25 |
| Screw hole diameter, M3 | 3.4 mm | 2 – 6 |
| LED lip projection from faceplate | 22 mm | 8 – 80 |
| LED lip drop below top panel | 20 mm | 8 – 60 |
| LED strip channel width | 12 mm | 5 – 30 |
| LED strip channel depth | 7 mm | 3 – 15 |
| Channel inset from lip side edges | 6 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm