Everything else
No-Drill Shelf Extension — Flat Peg Socket
- Bounding box
- 113.4 × 95 × 30.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Revision for half-inch shelf, 34-inch closet and 32-inch shelf; four C-channel side supports with friction-locking wedges and captive underside pockets for metal flat shelf support tongue 9mm projection x 7mm wide x 3mm thick, 5mm insertion shank.
Parameters
| Name | Value | Range |
|---|---|---|
| Shelf thickness | 12.7 mm | 10 – 20 |
| Nominal clearance on each side | 25.4 mm | 15 – 40 |
| Wall fitting clearance | 2 mm | 1 – 5 |
| Front-to-back length | 95 mm | 70 – 150 |
| Lower support reach | 90 mm | 60 – 130 |
| Upper clamping lip reach | 58 mm | 35 – 85 |
| Lower jaw thickness | 8 mm | 6 – 12 |
| Upper lip thickness | 7 mm | 5 – 10 |
| Flat peg tongue protrusion | 9 mm | 7 – 14 |
| Flat peg tongue width | 7 mm | 5 – 12 |
| Flat peg tongue thickness | 3 mm | 2 – 5 |
| Pocket clearance on each side | 0.5 mm | 0.2 – 1 |
| Lock wedge length | 70 mm | 40 – 90 |
| Lock wedge width | 70 mm | 40 – 90 |
| Taper tip | 1.8 mm | 1.2 – 2.8 |
| Taper tail | 3.8 mm | 3 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm