Brackets and mounts
Nissan Versa Rear Diffuser - 3 Section Modular Valance
- Bounding box
- 1060.0 × 180.0 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
Create a fully editable 3D CAD model of a custom rear bumper diffuser for a 2010 Nissan Versa hatchback. Design requirements: - Sporty, aerodynamic rear valance. - Wide central recessed rectangular panel. - Smooth curved edges following the original bumper shape. - Large opening on the LEFT side for a dual exhaust outlet. - Preserve clearance around both exhaust tips. - Modular construction, divided into printable sections. - Reinforced joining tabs and mounting points. - Designed for ASA 3D printing. - All dimensions in millimeters. - Exportable as STL, STEP and 3MF. Do not assume vehicle dimensions. Make all dimensions adjustable parameters until actual measurements are provided.
Parameters
| Name | Value | Range |
|---|---|---|
| Section Height | 180 mm | 60 – 400 |
| Shell Depth | 8 mm | 3 – 30 |
| Outer Edge Radius (L/R) | 10 mm | 0 – 40 |
| Center Corner Radius | 12 mm | 0 – 40 |
| Left Section Width | 320 mm | 150 – 600 |
| Center Section Width | 420 mm | 150 – 800 |
| Right Section Width | 320 mm | 150 – 600 |
| Recess Depth | 3 mm | 0.5 – 15 |
| Recess Border Margin | 25 mm | 5 – 80 |
| Recess Draft Angle | 3 deg | 0 – 15 |
| Exhaust Tip Diameter | 60 mm | 20 – 120 |
| Clearance Around Tips | 12 mm | 2 – 40 |
| Tip Centre Spacing | 110 mm | 40 – 260 |
| Opening X Offset | 0 mm | -120 – 120 |
| Opening Height Offset | 70 mm | 20 – 160 |
| Tab Protrusion Length | 12 mm | 4 – 40 |
| Tab Width | 28 mm | 10 – 80 |
| Tab Thickness | 4 mm | 1.5 – 12 |
| Tabs Per Interface | 3 pcs | 1 – 6 |
| Tab Fit Clearance | 0.3 mm | 0 – 1.5 |
| Mounting Hole Diameter | 6 mm | 2 – 14 |
| Mounting Holes Per Section | 3 pcs | 1 – 8 |
| Mounting Hole Inset | 16 mm | 5 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu