Brackets and mounts
Nexus Terra Motos - Exploded Chassis Assembly
- Bounding box
- 7870.0 × 360.0 × 260.0 mm
- Engine
- Precision B-rep
- Parameters
- 53
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
High-performance motorcycle chassis named "Nexus Terra Motos". Style: Clean, professional blueprint, black ink lines on a pure white background, orthographic projection format. No colors, no shadows, no fotorrealistic textures. Must include fine leader lines with reference numbers pointing to specific components. Technical Specifications & Dimensions to Draw: 1. Chassis Base: A central rigid motorcycle frame structure measuring 1450mm wheelbase, made of a structural sandwich composite shell. The internal layers must display a precise geometric honeycomb pattern. 2. Microfluidic Neural Channels: Embedded inside the chassis walls, render an ultra-fine matrix grid of parallel capillary microchannels (0.5mm diameter) that carry fluid. Show an enlarged cutaway detail view (cross-section) of a chassis section revealing these hollow microchannels lined with an insulating polyimide film coating. 3. Non-Contact Synapse Sensors: Positioned precisely 1.5mm above the microchannels, show circular micro-sensor mounts. Ensure there is a clear physical clearance gap between the fluid channels and the metallic pins of the sensors, demonstrating proximity-based electromagnetic induction/optical coupling. 4. Active Vectoring Brake System: At the lower section of the chassis frame, draw a high-pressure pneumatic intake duct (front-facing). Connect this internal pneumatic conduit to three specific output nozzles: two symmetrical lateral hydrojet vectoring stabilization ducts on the left and right flanks, and one main vertical counter-thrust thrust jet positioned pointing downward adjacent to the bottom center of the chassis. 5. Variable Geometry Mechanism: At the rear section of the frame, draw a motorized linear telescopic guiding rail rail interface that allows longitudinal extension and contraction of the swingarm, with bidirectional motion arrow indicators (➔ ➔) showing mechanical adjustment. Views Layout: Arrange into 4 quadrants on the blueprint canvas: Top Plan View, Front Elevation View, Side Elevation View, and an exploded Isometric 3D View detailing the internal microchannel sandwich layers.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 750 mm | 300 – 2000 |
| Chassis Length | 620 mm | 300 – 900 |
| Chassis Width | 360 mm | 150 – 600 |
| Chassis Height | 260 mm | 100 – 500 |
| Chassis Wall Thickness | 20 mm | 5 – 60 |
| Core Length | 120 mm | 40 – 300 |
| Core Width | 60 mm | 30 – 200 |
| Core Thickness | 8 mm | 2 – 30 |
| Honeycomb Cell Size | 4 mm | 2 – 20 |
| Microchannel Length | 200 mm | 50 – 400 |
| Microchannel Layer Width | 80 mm | 20 – 200 |
| Layer Thickness | 0.8 mm | 0.2 – 5 |
| Channel Diameter | 0.5 mm | 0.2 – 3 |
| Channel Count | 12 count | 1 – 50 |
| Polyimide Film Thickness | 0.02 mm | 0.005 – 0.5 |
| Polyimide Sleeve Length | 30 mm | 5 – 100 |
| Sensor Plate Length | 300 mm | 100 – 500 |
| Sensor Plate Width | 120 mm | 40 – 300 |
| Sensor Plate Thickness | 3 mm | 1 – 10 |
| Sensor Boss Diameter | 8 mm | 3 – 20 |
| Sensor Boss Height | 2 mm | 0.5 – 10 |
| Sensor Pin Diameter | 1.5 mm | 0.5 – 5 |
| Sensor Pin Length | 4 mm | 1 – 20 |
| Sensor Clearance Gap | 1.5 mm | 0.5 – 10 |
| Sensor Rows | 4 count | 1 – 10 |
| Sensor Columns | 8 count | 1 – 20 |
| Intake Outer Diameter | 60 mm | 20 – 150 |
| Intake Inner Diameter | 50 mm | 10 – 140 |
| Intake Length | 120 mm | 40 – 300 |
| Intake Flange Diameter | 80 mm | 30 – 180 |
| Intake Flange Thickness | 6 mm | 2 – 20 |
| Hydrojet Outer Diameter | 35 mm | 15 – 100 |
| Hydrojet Inner Diameter | 25 mm | 8 – 90 |
| Hydrojet Length | 90 mm | 30 – 200 |
| Hydrojet Flange Diameter | 50 mm | 20 – 120 |
| Hydrojet Flange Thickness | 5 mm | 1 – 15 |
| Vertical Nozzle Outer Diameter | 50 mm | 20 – 120 |
| Vertical Nozzle Inner Diameter | 40 mm | 10 – 110 |
| Vertical Nozzle Height | 80 mm | 20 – 200 |
| Vertical Flange Diameter | 70 mm | 30 – 150 |
| Vertical Flange Thickness | 6 mm | 2 – 20 |
| Guide Rail Length | 300 mm | 100 – 500 |
| Guide Rail Width | 45 mm | 20 – 100 |
| Guide Rail Height | 25 mm | 10 – 80 |
| Rail Slot Width | 14 mm | 4 – 40 |
| Rail Slot Depth | 10 mm | 2 – 30 |
| Rail Mounting Hole Diameter | 6 mm | 2 – 20 |
| Carriage Length | 120 mm | 40 – 250 |
| Carriage Width | 80 mm | 30 – 200 |
| Carriage Height | 60 mm | 20 – 150 |
| Carriage Slot Width | 16 mm | 4 – 40 |
| Carriage Slot Depth | 12 mm | 2 – 30 |
| Carriage Hole Diameter | 8 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu