Brackets and mounts
Neutron Modular Sensor Enclosure - Base, Cover, Dual Magnetic Connectors, Screws
- Bounding box
- 76.0 × 48.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- October 26, 2026
Download
Free to download and use. See the terms.
The prompt
Design a practical, professional, 3D-printable electronics enclosure for the Neutron STEM modular sensor system. Create a compact, distinctive enclosure with a deep violet body, white accents, softly chamfered corners, and a simple precision-engineered geometric shape. **Mandatory connector requirements:** - Exactly TWO magnetic electrical connectors per enclosure. - One connector recessed into the centre of the LEFT vertical side wall (INPUT). - One identical connector recessed into the centre of the RIGHT vertical side wall (OUTPUT). - Both connectors must face horizontally outward toward neighbouring modules. - Use the supplied reference photo to match the connector's appearance and proportions. - Keep both connector housings fully inside the enclosure's outer silhouette. - No protruding connector blocks and no connectors on the top, bottom, front, or back. - No additional ports or connectors anywhere. **Mechanical construction:** - Hollow enclosure with a removable top cover. - Internal PCB mounting posts, wiring clearance, and space for sensor components. - Flat bottom, realistic wall thickness, rounded edges, and concealed screw mounting. - Simple geometry suitable for FDM 3D printing. - Make the left and right connector pockets symmetrical and aligned. - Design the exterior so neighbouring modules can attach directly side by side without interference. Do not guess the magnetic connector's exact dimensions. Keep its dimensions, contact spacing, polarity, and tolerances as parameters to be confirmed from the physical reference. Generate a real, editable 3D CAD model, not just a rendered picture. Show a three-quarter view, top view, and both side views. Export STEP and STL if supported.
Parameters
| Name | Value | Range |
|---|---|---|
| External Length (X) | 76 mm | 40 – 160 |
| External Width (Y) | 48 mm | 30 – 120 |
| External Height (Z) | 26 mm | 15 – 80 |
| Wall Thickness | 2.4 mm | 1.2 – 5 |
| Floor Thickness | 2.4 mm | 1 – 6 |
| Vertical Corner Chamfer | 3 mm | 0.5 – 4 |
| Bottom Edge Fillet | 1 mm | 0.2 – 2 |
| Corner Post Diameter | 6 mm | 3 – 12 |
| Post Tap Drill Dia | 2.1 mm | 1 – 5 |
| Post Hole Depth | 6 mm | 2 – 15 |
| PCB Standoff Dia | 5 mm | 2.5 – 10 |
| PCB Standoff Height | 5 mm | 2 – 15 |
| PCB Pilot Hole Dia | 2.2 mm | 1 – 5 |
| PCB Pilot Hole Depth | 4 mm | 1 – 12 |
| PCB Post Inset X | 18 mm | 8 – 60 |
| PCB Post Inset Y | 13 mm | 6 – 40 |
| Cover Thickness | 4 mm | 1.5 – 10 |
| Cover Corner Chamfer | 3 mm | 0.5 – 4 |
| Cover Screw Clearance Dia | 2.7 mm | 1.5 – 6 |
| Counterbore Dia | 5.2 mm | 2.5 – 9 |
| Counterbore Depth | 1.8 mm | 0.5 – 3.5 |
| Accent Panel Length | 52 mm | 10 – 70 |
| Accent Panel Width | 24 mm | 8 – 40 |
| Accent Panel Depth | 0.6 mm | 0.2 – 1.5 |
| Connector Envelope Length (Y) | 12 mm | 6 – 24 |
| Connector Envelope Height (Z) | 8 mm | 4 – 18 |
| Connector Envelope Depth (X) | 5 mm | 2 – 12 |
| Connector Recess / Embed | 0.3 mm | 0.1 – 1 |
| Connector Centre Height | 13 mm | 6 – 20 |
| Contact Pad Dia (TBC) | 1.8 mm | 0.8 – 4 |
| Contact Spacing (TBC) | 6 mm | 2 – 10 |
| Contact Recess Depth (TBC) | 1.2 mm | 0.3 – 3 |
| Screw Nominal Dia | 2.5 mm | 1 – 5 |
| Screw Length | 6 mm | 3 – 20 |
| Screw Head Dia | 4.7 mm | 2 – 9 |
| Screw Head Height | 1.6 mm | 0.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu