Brackets and mounts
NeuroMorph Upper Arm Cuff
- Bounding box
- 105.0 × 93.0 × 120.1 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- August 27, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single editable parametric mechanical part for a wearable robotic arm. Part name: NeuroMorph Upper Arm Cuff. Create a C-shaped curved cuff for an adult upper arm. Dimensions: * Overall cuff length: 120 mm * Inner diameter: 85 mm * Wall thickness: 4 mm * Cuff opening angle: approximately 60 degrees Features: * Smooth rounded edges * Two elongated strap slots on each side * Two small mounting bosses on the outer surface for attaching a robotic actuator * Symmetrical left/right geometry * Lightweight design suitable as a conceptual 3D-printable prototype Use millimetres. Generate ONLY this single cuff part. Do not generate an arm, actuator, electronics, sensors or other components. Make the result a valid editable parametric CAD solid.
Parameters
| Name | Value | Range |
|---|---|---|
| Cuff Length | 120 mm | 80 – 200 |
| Inner Diameter | 85 mm | 60 – 150 |
| Wall Thickness | 4 mm | 2 – 10 |
| Opening Angle (deg) | 60 deg | 20 – 120 |
| Strap Slot Width | 8 mm | 4 – 15 |
| Strap Slot Length | 20 mm | 10 – 40 |
| Boss Diameter | 10 mm | 5 – 20 |
| Boss Height | 6 mm | 3 – 15 |
| Boss Hole Diameter | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent