Brackets and mounts
NDT Ultrasonic Wedge Block
- Bounding box
- 25.4 × 57.2 × 33.1 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- September 6, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a parametric NDT ultrasonic wedge block for a 1 inch by 0.75 inch rectangular transducer. The top surface must be a flat mating plane of 1" x 0.75" with two industrial mounting holes spaced exactly 1.00 inch apart from center to center. The body must extend downwards as a solid wedge. The physical wedge face angle must be exactly 44.2 degrees relative to the vertical axis to achieve a 70-degree refracted angle in steel using a PLA printed material. The total width of the block should be 1.25 inches. Output as a clean solid with flat surfaces."
Parameters
| Name | Value | Range |
|---|---|---|
| Transducer Length (1.000 in) | 25.4 mm | 20 – 60 |
| Transducer Width (0.750 in) | 19.05 mm | 10 – 30 |
| Overall Block Width (1.250 in) | 31.75 mm | 30 – 80 |
| Wedge Face Angle from Vertical | 44.2 deg | 30 – 60 |
| Toe Height | 5 mm | 1 – 20 |
| Mounting Hole Spacing (1.000 in) | 25.4 mm | 20 – 40 |
| Mounting Hole Diameter | 4 mm | 2 – 6 |
| Transducer Pad Height | 2 mm | 0.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent