Nano SIM Travel Case

1 views

Bounding box: 47.5 × 15.8 × 6.1 mm
Engine: 3D Printing B-rep
Parameters: 15
Published: November 5, 2026

Download

Free to download and use. See the terms.

The prompt

3D yazıcım için nano sim card travel

Parameters

Name	Value	Range
SIM card width	12.3 mm	8 – 20
SIM card length	8.8 mm	6 – 15
SIM card thickness	0.67 mm	0.4 – 1.2
Pocket clearance per side	0.3 mm	0.1 – 0.6
Number of SIM slots	3 mm	1 – 6
Outer wall thickness	2 mm	1.2 – 4
Rib / margin between pockets	1.2 mm	0.8 – 3
Floor thickness under pockets	1.2 mm	0.8 – 3
Wall height above the floor	3 mm	2 – 8
Outer corner radius	3 mm	1 – 8
Lid plug clearance per side	0.25 mm	0.1 – 0.5
Lid plug wall thickness	1.5 mm	1 – 3
Lid plug height	1.6 mm	0.8 – 4
Lid top thickness	1.5 mm	1 – 3
Lid/base overlap for a solid joint	0.5 mm	0.3 – 1

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS