Everything else
Multi-hole Robot Car Chassis
- Bounding box
- 172 × 236.5 × 65 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
这是一台机器人小车，创客多孔铝条底盘、左右双摆臂、TT 减速电机、黄色轮毂轮胎、弹碗；生成 STEP 格式装配模型，零件分开，孔距 10mm，M3 孔，铝板厚度 2mm
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis width X | 130 mm | 60 – 220 |
| Chassis length Y | 140 mm | 60 – 260 |
| Aluminium plate thickness | 2 mm | 1.5 – 5 |
| Hole grid pitch | 10 mm | 10 – 30 |
| M3 clearance hole dia | 3.4 mm | 3 – 5 |
| Hole grid edge margin | 8 mm | 5 – 25 |
| Arm length | 110 mm | 60 – 220 |
| Arm width | 18 mm | 12 – 30 |
| Arm outward sweep | 15 deg | 0 – 45 |
| Tyre outer dia | 65 mm | 30 – 110 |
| Tyre width | 26 mm | 10 – 50 |
| Yellow hub dia | 50 mm | 20 – 100 |
| Motor shaft dia | 5.6 mm | 3 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm