Everything else
MTB Flat Platform Pedal (110x100, 9/16")
- Bounding box
- 135.0 × 100.0 × 22.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
請試著繪製如附件照片的踏板造型，其尺寸是110 × 100 mm 外形、最大厚度 22 mm、7075-T6 鋁合金，軸心最大外徑為18mm，9/16的自行車螺紋
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 110 mm | 90 – 150 |
| Overall width | 100 mm | 70 – 130 |
| Platform thickness | 16 mm | 10 – 22 |
| Axle hub diameter (= max 22 mm) | 22 mm | 16 – 34 |
| Axle hub length | 32 mm | 15 – 50 |
| Corner fillet radius | 4 mm | 0 – 10 |
| Bearing bore diameter | 14.6 mm | 10 – 20 |
| Bearing bore depth | 45 mm | 20 – 100 |
| Spindle thread OD (9/16-20) | 14.29 mm | 10 – 20 |
| Spindle collar diameter | 18 mm | 12 – 26 |
| Spindle protrusion | 25 mm | 12 – 45 |
| Spindle collar length | 8 mm | 3 – 20 |
| Centre spine half-width | 11 mm | 6 – 20 |
| Perimeter rim width | 12 mm | 6 – 24 |
| Cross rib width | 8 mm | 5 – 20 |
| Cross rib position (X) | 12 mm | 0 – 30 |
| Front end rim width | 12 mm | 6 – 26 |
| Traction pin diameter | 4 mm | 2 – 8 |
| Traction pin height | 3 mm | 1 – 6 |
| Pin inset from edge | 8 mm | 4 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm