MSC 17x5.8 Drone Propeller (Non-Folding)

1 views

Bounding box: 431.8 × 46.0 × 12.0 mm
Engine: Precision B-rep
Parameters: 14
Published: October 15, 2026

Download

Free to download and use. See the terms.

The prompt

"Generate a 3D CAD model of a non-folding drone propeller blade based on the MSC 17x5.8 specifications. Diameter: 17 inches (431.8 mm), Pitch: 5.8 inches. It must be optimized for an RPM range of 4000-6500 RPM, with a recommended thrust of 2.0-4.0 kg and max thrust of 8.0 kg. The design should accommodate high-efficiency multirotor motors such as T-Motor MN4014 . Output format should be STEP."

Parameters

Name	Value	Range
Propeller Diameter	431.8 mm	100 – 800
Pitch (advance/rev)	147.32 mm	50 – 400
Blade Count	2 pcs	2 – 4
Root Chord	26 mm	10 – 60
Max Chord	40 mm	15 – 80
Tip Chord	12 mm	4 – 40
Root Thickness	4 mm	1 – 12
Tip Thickness	1.8 mm	0.6 – 8
Tip Sweep	8 mm	-20 – 30
Hub Diameter	46 mm	24 – 120
Hub Height	12 mm	4 – 40
Shaft Bore	6 mm	2 – 20
Mount Hole Dia (M3 clearance)	3.4 mm	1 – 10
Mount Hole Square Pitch	25 mm	8 – 40

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS