Loading the interactive model…
Interactive 3D model of MS Hot Water Tank 1000x600x500Everything else
MS Hot Water Tank 1000x600x500
1 views
- Bounding box
- 1070.0 × 660.0 × 700.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- October 9, 2026
Download
Free to download and use. See the terms.
The prompt
I need hot water tank ms
Parameters
| Name | Value | Range |
|---|---|---|
| Tank Length (X) | 1000 mm | 300 – 2500 |
| Tank Width (Y) | 600 mm | 200 – 1500 |
| Tank Height (Z) | 500 mm | 200 – 1500 |
| Shell Wall Thickness | 3 mm | 1 – 10 |
| Port Pipe O.D. | 60 mm | 20 – 150 |
| Port Bore | 40 mm | 10 – 120 |
| Port Stand-out | 70 mm | 20 – 250 |
| Flange O.D. | 110 mm | 40 – 260 |
| Flange Thickness | 12 mm | 4 – 40 |
| Port Position (Y) | 300 mm | 40 – 1400 |
| Hot Outlet Height (Z) | 350 mm | 40 – 460 |
| Cold Inlet Height (Z) | 150 mm | 40 – 460 |
| Drain Pipe O.D. | 48 mm | 15 – 120 |
| Drain Bore | 30 mm | 8 – 100 |
| Drain Length Below Tank | 90 mm | 20 – 250 |
| Drain Position (X) | 700 mm | 40 – 2400 |
| Drain Position (Y) | 150 mm | 40 – 1400 |
| Union Nut Across Flats | 55 mm | 20 – 140 |
| Union Nut Height | 25 mm | 8 – 60 |
| Sight Glass O.D. | 20 mm | 8 – 60 |
| Sight Glass Bore | 12 mm | 4 – 50 |
| Sight Glass Length | 320 mm | 100 – 460 |
| Stand-off From Face | 50 mm | 20 – 250 |
| Gauge Position (X) | 600 mm | 60 – 2400 |
| Gauge Centre Height | 250 mm | 100 – 450 |
| Gauge Connector O.D. | 26 mm | 10 – 70 |
| Top Fitting Position (X) | 450 mm | 60 – 2400 |
| Top Fitting Position (Y) | 350 mm | 60 – 1400 |
| Top Boss O.D. | 70 mm | 20 – 200 |
| Top Boss Height | 20 mm | 5 – 80 |
| Probe / Vent Diameter | 10 mm | 4 – 40 |
| Probe Height Above Boss | 90 mm | 20 – 400 |
| Probe Insertion Depth | 60 mm | 10 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
STEPSTLGLB22 PARAMS
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
STEPSTLGLB20 PARAMS
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm
STEPSTLGLB4 PARAMS