Everything else
Movement Spacer for NH35 Case (Miyota 2035)
- Bounding box
- 30.5 × 30.5 × 6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
This is literally useless..... it would not even fit a miyota 2035? Did you review the technical drawing??
Parameters
| Name | Value | Range |
|---|---|---|
| Movement body diameter | 26 mm | 20 – 30 |
| Movement height / pocket depth | 3.15 mm | 2 – 6 |
| Stem axis above movement base | 1 mm | 0.4 – 3 |
| Spacer outer diameter | 30.5 mm | 24 – 40 |
| Total spacer height | 6 mm | 3 – 12 |
| Diametral movement clearance | 0.1 mm | 0 – 0.6 |
| Bottom support ledge width | 1 mm | 0.5 – 3 |
| Top insertion chamfer | 0.6 mm | 0 – 2 |
| Stem slot width | 1.8 mm | 0.8 – 4 |
| Stem slot height | 1.4 mm | 0.6 – 4 |
| Minimum wall left above stem slot | 1 mm | 0.6 – 3 |
| Bottom outer chamfer | 0.4 mm | 0 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm