Brackets and mounts
Mounting Ring with Reverse Hook and Upright Catch
- Bounding box
- 59.0 × 59.0 × 26.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
At the 29mm mark, create an upward-facing, perpendicular tab to serve as a mounting catch.
Parameters
| Name | Value | Range |
|---|---|---|
| Disc Outer Diameter | 59 mm | 20 – 200 |
| Centre Bore Diameter | 8 mm | 1 – 100 |
| Disc Thickness | 6 mm | 1 – 40 |
| Edge Chamfer | 0.8 mm | 0 – 5 |
| Hook Position from Centre | 29 mm | 8 – 100 |
| Hook Width | 10 mm | 2 – 60 |
| Hook Drop Below Disc | 8 mm | 1 – 50 |
| Hook Leg Thickness | 3 mm | 1 – 20 |
| Hook Barb Height | 3 mm | 0.5 – 20 |
| Hook Barb Undercut | 2.5 mm | 0.5 – 20 |
| Catch Position from Centre | 29 mm | 8 – 100 |
| Catch Height Above Disc | 12 mm | 1 – 60 |
| Catch Wall Thickness | 3 mm | 1 – 20 |
| Catch Width | 10 mm | 2 – 60 |
| Catch Lip Height | 3 mm | 0.5 – 20 |
| Catch Lip Overhang | 2.5 mm | 0.5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent