Brackets and mounts
Mounting Plate with CSK Holes and Underside Boss
- Bounding box
- 60.0 × 60.0 × 7.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- August 15, 2026
Download
Free to download and use. See the terms.
The prompt
Mounting plate 60mm square with chafer edge and corners cut 45 degresse 3mm 4 x countersunk M3 Screw Holes with 7mm diameter rebate 1mm deep under each screw hole. a raised rebate on the underside 50mm square 1mm high with corners cut at 45 degrees 10mm long
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Size | 60 mm | 30 – 120 |
| Plate Thickness | 6 mm | 2 – 15 |
| Top Edge Chamfer | 3 mm | 0.5 – 5 |
| M3 Clearance Hole Diameter | 3.2 mm | 2.5 – 4.5 |
| M3 Countersink Diameter | 6.5 mm | 5 – 10 |
| Countersink Angle | 90 deg | 60 – 120 |
| Under-Hole Rebate Diameter | 7 mm | 5 – 12 |
| Under-Hole Rebate Depth | 1 mm | 0.5 – 3 |
| Hole Pattern Inset From Edge | 15 mm | 8 – 25 |
| Underside Boss Size | 50 mm | 20 – 58 |
| Underside Boss Height | 1 mm | 0.5 – 5 |
| Boss Corner Cut Length | 10 mm | 2 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent