Gears and transmission
Motorized Sliding Sluice Gate - Exploded Multi-Part
- Bounding box
- 5795.0 × 300.0 × 625.0 mm
- Engine
- Precision B-rep
- Parameters
- 47
- Published
- October 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a professional monochrome CAD exploded view of a motorized vertical sliding sluice gate prototype. Gate plate: 250 × 250 mm stainless steel, 3–5 mm thick; water depth 200 mm; vertical travel 250 mm. Show the complete drive system: 12V DC worm gear motor, shaft coupling, horizontal steel shaft, pillow block bearings, two 90° bevel gearboxes, and two synchronized vertical T8×8 mm lead screws (8 mm lead, 2 mm pitch, four-start). Connect brass/bronze lead screw nuts securely to gate lifting brackets. Include guide rails, rigid steel or aluminum frame, mounting plates, fasteners, EPDM seals, and suitable thrust bearings for axial loads. Provide exploded isometric, assembled front, side and top views, numbered labels, dashed assembly lines, dimensions, and bill of materials with materials and quantities. Ensure realistic shaft alignment, compatible couplings, correct gearbox orientation, and synchronized lifting. Mark unverified dimensions and ratings “TO BE VERIFIED.” White background, precise engineering drawing style, suitable for student prototype planning.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Width | 450 mm | 300 – 700 |
| Frame Height | 600 mm | 400 – 900 |
| Frame Depth | 300 mm | 150 – 500 |
| Frame Member Section | 40 mm | 20 – 60 |
| Guide Rail Section | 25 mm | 15 – 40 |
| Gate Rail Clearance | 2 mm | 0.5 – 5 |
| Gate Plate Width | 250 mm | 150 – 350 |
| Gate Plate Height | 250 mm | 150 – 350 |
| Gate Plate Thickness | 4 mm | 2 – 8 |
| Seal Section Width | 10 mm | 6 – 16 |
| Seal Section Depth | 8 mm | 4 – 14 |
| Lifting Bracket Length | 60 mm | 40 – 100 |
| Lifting Bracket Width | 40 mm | 25 – 70 |
| Lifting Bracket Thickness | 6 mm | 4 – 12 |
| Lead Screw Nut OD | 18 mm | 12 – 30 |
| Lead Screw Nut Height | 16 mm | 8 – 30 |
| Lead Screw Spacing | 190 mm | 100 – 300 |
| Motor Width | 80 mm | 50 – 120 |
| Motor Depth | 70 mm | 40 – 110 |
| Motor Height | 120 mm | 80 – 180 |
| Motor Output Shaft Dia | 10 mm | 6 – 16 |
| Motor Output Shaft Length | 30 mm | 15 – 60 |
| Jaw Coupling OD | 25 mm | 15 – 45 |
| Jaw Coupling Length | 30 mm | 18 – 50 |
| Jaw Coupling Bore | 8 mm | 4 – 16 |
| Drive Shaft Diameter | 20 mm | 10 – 35 |
| Drive Shaft Length | 500 mm | 300 – 700 |
| Pillow Block Bore | 20 mm | 10 – 30 |
| Pillow Block Housing OD | 40 mm | 26 – 60 |
| Pillow Block Housing Length | 40 mm | 20 – 70 |
| Pillow Block Base Height | 8 mm | 3 – 16 |
| Bevel Gearbox Square Size | 50 mm | 30 – 80 |
| Bevel Gearbox Height | 60 mm | 35 – 100 |
| Gearbox Shaft Diameter | 10 mm | 5 – 15 |
| Gearbox Shaft Length | 25 mm | 12 – 45 |
| Lead Screw Diameter | 8 mm | 6 – 16 |
| Lead Screw Length | 350 mm | 200 – 600 |
| Lead Screw Lead (4-start) | 8 mm | 2 – 16 |
| Thread Pitch | 2 mm | 1 – 4 |
| Thrust Bearing ID | 8 mm | 6 – 16 |
| Thrust Bearing OD | 20 mm | 14 – 40 |
| Thrust Bearing Height | 8 mm | 4 – 16 |
| Mounting Plate Length | 140 mm | 60 – 250 |
| Mounting Plate Width | 120 mm | 60 – 250 |
| Mounting Plate Thickness | 5 mm | 3 – 12 |
| Fastener Diameter (M6) | 6 mm | 4 – 10 |
| Exploded Layout Gap | 500 mm | 300 – 900 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled